BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280143BTC
Varastossa
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-Pin SODIMM Kit for POSIFLEX RT-6015Q-G2
16 GB dual-channel DDR4 3200 CL22 SODIMM kit validated for the POSIFLEX RT-6015Q-G2 terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB dual-channel kit boosts POS terminal responsiveness
- DDR4 3200 CL22 speed matches system memory controller
- 20V low-voltage modules reduce terminal power draw
- 260-pin SODIMM form factor fits POSIFLEX RT-6015Q-G2 slots
- Major OEM Samsung Micron Hynix chips ensure stable operation
Designed for POSIFLEX RT-6015Q-G2 terminals
This 16GB kit uses two 8GB DDR4 3200 SODIMM modules built for the POSIFLEX RT-6015Q-G2. Each stick runs at 1.2V with CL22 timing and a 2Rx8 layout. The 260-pin form factor fits the terminal's memory slots without adapters or modification.
Sustained workload behaviour
Modules are stress tested under load to verify stability during continuous point-of-sale operation. The unbuffered non-ECC design handles typical transaction workloads at the rated 3200 speed. Major-brand Samsung Micron or Hynix chips provide consistent throughput without thermal throttling in the slim chassis.
Straightforward SODIMM installation
Installation follows the terminal's standard memory access procedure; no heat spreader means the modules seat cleanly in tight slots. The kit is validated for this specific model so compatibility issues are rare. Builders needing ECC registered memory or capacities beyond 16GB must choose a different solution.
Kohokohdat
- 16GB dual-channel kit boosts POS terminal responsiveness
- DDR4 3200 CL22 speed matches system memory controller
- 20V low-voltage modules reduce terminal power draw
- 260-pin SODIMM form factor fits POSIFLEX RT-6015Q-G2 slots
- Major OEM Samsung Micron Hynix chips ensure stable operation
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
Kysymyksiä tästä tuotteesta
Does the 1.20V DDR4 3200 kit run hot or draw extra power during all-day POS operation?
The modules operate at the standard 1.20V DDR4 voltage with no heat spreader, so they add minimal thermal load and power draw inside the RT-6015Q-G2 chassis.
What must the POSIFLEX RT-6015Q-G2 already have for this 260-pin SODIMM kit to install and run?
The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 non-ECC unbuffered modules at 1.20V.
How will the CL22 3200 modules behave alongside the original memory already installed in the RT-6015Q-G2?
All DDR4 memory in the system will run at the lowest common speed and highest common latency; the kit is validated for the RT-6015Q-G2 platform.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00282749BTC
Varastossa
