Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR4 SODIMM sticks, no heat spreader, 260-pin, 16GB kit

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-Pin SODIMM Kit for POSIFLEX RT-6015Q-G2

SKU CH-ZBC9-1JJE6

16 GB dual-channel DDR4 3200 CL22 SODIMM kit validated for the POSIFLEX RT-6015Q-G2 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 CL22 speed matches system memory controller
  • 20V low-voltage modules reduce terminal power draw
  • 260-pin SODIMM form factor fits POSIFLEX RT-6015Q-G2 slots
  • Major OEM Samsung Micron Hynix chips ensure stable operation

Designed for POSIFLEX RT-6015Q-G2 terminals

This 16GB kit uses two 8GB DDR4 3200 SODIMM modules built for the POSIFLEX RT-6015Q-G2. Each stick runs at 1.2V with CL22 timing and a 2Rx8 layout. The 260-pin form factor fits the terminal's memory slots without adapters or modification.

Sustained workload behaviour

Modules are stress tested under load to verify stability during continuous point-of-sale operation. The unbuffered non-ECC design handles typical transaction workloads at the rated 3200 speed. Major-brand Samsung Micron or Hynix chips provide consistent throughput without thermal throttling in the slim chassis.

Straightforward SODIMM installation

Installation follows the terminal's standard memory access procedure; no heat spreader means the modules seat cleanly in tight slots. The kit is validated for this specific model so compatibility issues are rare. Builders needing ECC registered memory or capacities beyond 16GB must choose a different solution.

Pluspunten

  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 3200 CL22 speed matches system memory controller
  • 20V low-voltage modules reduce terminal power draw
  • 260-pin SODIMM form factor fits POSIFLEX RT-6015Q-G2 slots
  • Major OEM Samsung Micron Hynix chips ensure stable operation

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Vragen over dit artikel

Does the 1.20V DDR4 3200 kit run hot or draw extra power during all-day POS operation?

The modules operate at the standard 1.20V DDR4 voltage with no heat spreader, so they add minimal thermal load and power draw inside the RT-6015Q-G2 chassis.

What must the POSIFLEX RT-6015Q-G2 already have for this 260-pin SODIMM kit to install and run?

The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 non-ECC unbuffered modules at 1.20V.

How will the CL22 3200 modules behave alongside the original memory already installed in the RT-6015Q-G2?

All DDR4 memory in the system will run at the lowest common speed and highest common latency; the kit is validated for the RT-6015Q-G2 platform.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.