Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 RDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR4 3200MHz PC4-25600 CL22 1.2V 1Rx8 ECC Registered RDIMM Kit Supermicro X12SPA-TF

SKU CH-6P4N-J3PFA

A 16 GB DDR4 registered ECC kit with two 8 GB modules running at 3200 MHz CL22 1.2 V, validated for the Supermicro X12SPA-TF motherboard

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 16GB 2X8GB

Näytä 8 muuta kokoonpanoa
  • Registered ECC design prevents silent data corruption and unplanned reboots
  • 16 GB dual-channel kit matches the board's population rules for full-speed operation
  • 3200 MHz DDR4 speed with CL22 timing runs at rated frequency without manual tuning
  • 2 V standard voltage keeps power draw low in dense server configurations
  • 288-pin RDIMM form factor fits the Supermicro X12SPA-TF memory slots exactly

Exact-match DDR4-3200 ECC RDIMM kit

This 16 GB kit provides two 8 GB Registered ECC DDR4-3200 modules built to the Supermicro X12SPA-TF motherboard's precise rank, voltage and timing requirements. The 1Rx8 organization and 1.2 V operation allow the memory controller to recognize full capacity and run at the rated PC4-25600 speed without manual tuning.

Replaces mismatched or slower RDIMMs

Upgrading from lower-frequency DDR4 or mixed-rank DIMMs eliminates population-rule conflicts and restores the board's intended bandwidth. The jump is worthwhile when the server currently runs at reduced speed, reports corrected ECC errors or cannot populate all slots with the existing configuration.

16 GB headroom for typical dual-socket workloads

The 16 GB total capacity handles virtualization hosts, database buffers and multi-threaded applications that fit within this footprint. Workloads requiring larger per-socket memory pools or higher-density DIMMs will exceed the kit's capacity and need a different module configuration.

Kohokohdat

  • Registered ECC design prevents silent data corruption and unplanned reboots
  • 16 GB dual-channel kit matches the board's population rules for full-speed operation
  • 3200 MHz DDR4 speed with CL22 timing runs at rated frequency without manual tuning
  • 2 V standard voltage keeps power draw low in dense server configurations
  • 288-pin RDIMM form factor fits the Supermicro X12SPA-TF memory slots exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will these 288-pin RDIMMs physically fit the Supermicro X12SPA-TF motherboard slots?

Yes, the kit uses the 288-pin DDR4 RDIMM form factor that the X12SPA-TF requires; it is not a UDIMM or SODIMM, so the modules seat correctly in the server's DIMM sockets.

What is the correct installation sequence for this 2x8GB registered ECC kit on the X12SPA-TF?

Consult the motherboard manual for the approved DIMM population order; registered ECC modules must be installed in the specific slot sequence the board defines to initialise at full 3200 MHz speed.

How often will the ECC registered modules need replacement under normal server workloads?

The modules carry a lifetime replacement warranty and have no scheduled replacement interval; ECC corrects single-bit errors on the fly, so they remain in service until a hardware fault occurs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.