NEMIX RAM 16GB (4x4GB) DDR3 1066MHz PC3-8500 CL7 1.5V 240-Pin UDIMM desktop RAM
- 16GB (4 x 4GB)
- 240-Pin DDR3 UDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
16 GB DDR3 desktop kit, four 4 GB unbuffered modules at 1600 MT/s and CL11 running on 1.35 V
Capacity 16GB (4 x 4GB)
This NEMIX RAM kit supplies 16 GB of DDR3 memory in four 4 GB UDIMM modules. Each stick runs at 1600 MT/s with CL11 latency at 1.35 V. The unbuffered, non-ECC design fits standard 240-pin desktop motherboards. It is built for users adding capacity to an existing DDR3 platform.
The kit suits owners of older desktops or workstations that still use DDR3 and have four free slots. It will not work in boards that require registered or ECC modules. Systems limited to lower voltages or different pin counts should look elsewhere.
Four populated slots deliver 16 GB, which handles everyday multitasking and typical office workloads comfortably. Heavy content-creation tasks or modern gaming may exceed this capacity. No heat spreaders are included, so airflow around the modules should be adequate.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR3 Desktop PC Memory Solutions |
| Part Number | MD12800-428LK4 |
| Capacity | 16GB (4 x 4GB) |
| Type | 240-Pin DDR3 UDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The modules are rated for DDR3 1600 PC3-12800 CL11 at 1.35 V. The motherboard must support that speed and voltage; otherwise it will fall back to a lower JEDEC setting.
Mixing kits is possible but not guaranteed. For best stability use identical speed, voltage, latency and chip density across all populated slots.
No heat spreader is included. Standard case airflow is sufficient for the specified 1.35 V unbuffered UDIMMs.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?