Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NEMIX RAM

NEMIX RAM 16GB (4x4GB) DDR3 1600 CL11 1.35V desktop RAM

SKU CH-CNTS-W5XTV

16 GB DDR3 desktop kit, four 4 GB unbuffered modules at 1600 MT/s and CL11 running on 1.35 V

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 16GB (4 x 4GB)

  • 16 GB total capacity in a 4 x 4 GB kit
  • DDR3 1600 speed rated at PC3-12800
  • Low 1.35 V operation for reduced power draw
  • CL11 latency for responsive desktop performance
  • 240-pin unbuffered non-ECC UDIMM for broad compatibility

16 GB DDR3 Kit for Desktop Upgrades

This NEMIX RAM kit supplies 16 GB of DDR3 memory in four 4 GB UDIMM modules. Each stick runs at 1600 MT/s with CL11 latency at 1.35 V. The unbuffered, non-ECC design fits standard 240-pin desktop motherboards. It is built for users adding capacity to an existing DDR3 platform.

Suitable for DDR3 Systems Needing More Capacity

The kit suits owners of older desktops or workstations that still use DDR3 and have four free slots. It will not work in boards that require registered or ECC modules. Systems limited to lower voltages or different pin counts should look elsewhere.

Four Modules Give 16 GB Total Headroom

Four populated slots deliver 16 GB, which handles everyday multitasking and typical office workloads comfortably. Heavy content-creation tasks or modern gaming may exceed this capacity. No heat spreaders are included, so airflow around the modules should be adequate.

Pluspunten

  • 16 GB total capacity in a 4 x 4 GB kit
  • DDR3 1600 speed rated at PC3-12800
  • Low 1.35 V operation for reduced power draw
  • CL11 latency for responsive desktop performance
  • 240-pin unbuffered non-ECC UDIMM for broad compatibility

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD12800-428LK4
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this 1600 MHz CL11 kit run at the rated speed on my motherboard?

The modules are rated for DDR3 1600 PC3-12800 CL11 at 1.35 V. The motherboard must support that speed and voltage; otherwise it will fall back to a lower JEDEC setting.

Can I use these four 4 GB sticks together with my existing memory?

Mixing kits is possible but not guaranteed. For best stability use identical speed, voltage, latency and chip density across all populated slots.

Does this kit require a heat spreader or active cooling?

No heat spreader is included. Standard case airflow is sufficient for the specified 1.35 V unbuffered UDIMMs.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.