BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278972BTC
Varastossa
NEMIX RAM
NEMIX RAM 16GB DDR4 2133 CL15 260-Pin SODIMM memory upgrade for POSIFLEX RT-5116
16 GB DDR4 2133 CL15 SODIMM memory upgrade for POSIFLEX RT-5116 terminals
- Capacity16GB
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB single-module upgrade for POSIFLEX RT-5116
- DDR4 2133 MHz CL15 timing for responsive operation
- 2 V low-voltage design reduces power draw
- 260-pin SODIMM form factor fits the terminal slot
- Major OEM Samsung, Micron or Hynix chips ensure reliability
POSIFLEX RT-5116 memory upgrade
This 16 GB DDR4 SODIMM is built specifically for the POSIFLEX RT-5116 terminal. It delivers a direct capacity increase for point-of-sale workloads that need more headroom than the factory configuration provides.
Single-module 16 GB kit
The package contains one 260-pin stick rated at 2133 MHz PC4-17000 with CL15 latency and 1.2 V operation. No extra cables, brackets or software discs are included, so the only change is the memory capacity itself.
Tool-free slot access
The SODIMM slots on the RT-5116 are reachable after removing the service cover, letting most technicians swap modules in minutes. The main risk is seating the 2Rx8 stick unevenly, which causes a no-post condition until re-inserted fully.
Kohokohdat
- 16 GB single-module upgrade for POSIFLEX RT-5116
- DDR4 2133 MHz CL15 timing for responsive operation
- 2 V low-voltage design reduces power draw
- 260-pin SODIMM form factor fits the terminal slot
- Major OEM Samsung, Micron or Hynix chips ensure reliability
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS17000-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM |
Kysymyksiä tästä tuotteesta
Will the 1.2 V DDR4 SODIMM need any periodic cleaning or re-seating after installation?
No scheduled maintenance is required; the module is a solid-state component with no moving parts and no heat spreader to trap dust.
What limits continuous operation in a POSIFLEX RT-5116 terminal?
The 2133 MT/s data rate and CL15 latency set the maximum sustained throughput the memory subsystem can deliver.
How much heat and power does a single 16 GB stick draw during all-day use?
At 1.20 V the module runs cool without a heat spreader, drawing only the low power typical of DDR4 SODIMM operation.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00281568BTC
Varastossa
