Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 16GB DDR4 2133 CL15 260-Pin SODIMM memory upgrade for POSIFLEX RT-5116

SKU CH-PXM2-W6BKH

16 GB DDR4 2133 CL15 SODIMM memory upgrade for POSIFLEX RT-5116 terminals

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB single-module upgrade for POSIFLEX RT-5116
  • DDR4 2133 MHz CL15 timing for responsive operation
  • 2 V low-voltage design reduces power draw
  • 260-pin SODIMM form factor fits the terminal slot
  • Major OEM Samsung, Micron or Hynix chips ensure reliability

POSIFLEX RT-5116 memory upgrade

This 16 GB DDR4 SODIMM is built specifically for the POSIFLEX RT-5116 terminal. It delivers a direct capacity increase for point-of-sale workloads that need more headroom than the factory configuration provides.

Single-module 16 GB kit

The package contains one 260-pin stick rated at 2133 MHz PC4-17000 with CL15 latency and 1.2 V operation. No extra cables, brackets or software discs are included, so the only change is the memory capacity itself.

Tool-free slot access

The SODIMM slots on the RT-5116 are reachable after removing the service cover, letting most technicians swap modules in minutes. The main risk is seating the 2Rx8 stick unevenly, which causes a no-post condition until re-inserted fully.

Puncte forte

  • 16 GB single-module upgrade for POSIFLEX RT-5116
  • DDR4 2133 MHz CL15 timing for responsive operation
  • 2 V low-voltage design reduces power draw
  • 260-pin SODIMM form factor fits the terminal slot
  • Major OEM Samsung, Micron or Hynix chips ensure reliability

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-628K1
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Will the 1.2 V DDR4 SODIMM need any periodic cleaning or re-seating after installation?

No scheduled maintenance is required; the module is a solid-state component with no moving parts and no heat spreader to trap dust.

What limits continuous operation in a POSIFLEX RT-5116 terminal?

The 2133 MT/s data rate and CL15 latency set the maximum sustained throughput the memory subsystem can deliver.

How much heat and power does a single 16 GB stick draw during all-day use?

At 1.20 V the module runs cool without a heat spreader, drawing only the low power typical of DDR4 SODIMM operation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.