Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board DDR4 memory stick, very low profile, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 2Rx8 1.2V 288-Pin VLP ECC UDIMM memory upgrade

SKU CH-EH7Q-QHFBD

16 GB DDR4 ECC UDIMM at 2400 MT/s, CL17, 1.2 V, 2Rx8, 288-pin VLP form factor

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands workstation memory headroom
  • DDR4 2400 speed delivers 19200 MT/s data throughput
  • ECC support detects and corrects single-bit errors
  • VLP form factor fits space-constrained server chassis
  • 2 V operation reduces power draw per module

16 GB DDR4 2400 ECC UDIMM

This 16 GB DDR4 2400 module delivers ECC error correction in a 288-pin VLP unbuffered design. It runs at 1.2 V with CL17 latency and a 2Rx8 rank structure. The stick is built for workstations and servers that require registered-grade reliability without registered signalling.

Server and workstation upgrades needing

Suits administrators adding capacity to compatible Hynix platforms or similar OEM boards that accept 2Rx8 unbuffered ECC UDIMMs. Not for consumer desktops lacking ECC support in the BIOS, nor for systems that require registered or load-reduced modules instead of unbuffered.

Fits standard 288-pin DDR4 slots

The VLP height eases installation in dense chassis or blade enclosures where vertical space is limited. One module occupies a single DIMM slot and leaves remaining channels free for matching sticks to reach the desired total capacity.

Kohokohdat

  • 16 GB capacity expands workstation memory headroom
  • DDR4 2400 speed delivers 19200 MT/s data throughput
  • ECC support detects and corrects single-bit errors
  • VLP form factor fits space-constrained server chassis
  • 2 V operation reduces power draw per module

Tekniset tiedot

BrandNEMIX RAM
SeriesHynix Server/Workstaion Compatible Series Memory
ModelHynix DDR4 2666MHZ VLP ECC Unbuffered UDIMM
Part NumberME19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHynix
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 2666MHZ VLP ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 288-PIN VLP ECC Unbuffered UDIMM

Kysymyksiä tästä tuotteesta

Does my motherboard need a 288-pin DDR4 slot and ECC support for this 16 GB module to function?

Yes, this 288-pin DDR4 UDIMM requires a motherboard with 288-pin DDR4 slots that also supports ECC unbuffered memory; without ECC support the module will not operate correctly.

Can I run this CL17 2400 MHz stick alongside my existing 2666 MHz DDR4 ECC modules without manual timing changes?

The system will automatically down-clock all modules to the slowest common speed, so the 2666 MHz sticks will run at 2400 MHz with CL17 timings when mixed with this module.

After installation, how do I confirm the module is recognised as 16 GB ECC at 2400 MHz?

Check the BIOS memory information screen or run a tool such as CPU-Z; it should show 16 GB capacity, DDR4-2400 frequency, CL17 latency and ECC enabled for this DIMM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.