SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502629BTC
재고 있음
NEMIX RAM
NEMIX RAM 16GB DDR4 2400 CL17 2Rx8 1.2V 288-Pin VLP ECC UDIMM memory upgrade
16 GB DDR4 ECC UDIMM at 2400 MT/s, CL17, 1.2 V, 2Rx8, 288-pin VLP form factor
- Capacity16GB
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity expands workstation memory headroom
- DDR4 2400 speed delivers 19200 MT/s data throughput
- ECC support detects and corrects single-bit errors
- VLP form factor fits space-constrained server chassis
- 2 V operation reduces power draw per module
16 GB DDR4 2400 ECC UDIMM
This 16 GB DDR4 2400 module delivers ECC error correction in a 288-pin VLP unbuffered design. It runs at 1.2 V with CL17 latency and a 2Rx8 rank structure. The stick is built for workstations and servers that require registered-grade reliability without registered signalling.
Server and workstation upgrades needing
Suits administrators adding capacity to compatible Hynix platforms or similar OEM boards that accept 2Rx8 unbuffered ECC UDIMMs. Not for consumer desktops lacking ECC support in the BIOS, nor for systems that require registered or load-reduced modules instead of unbuffered.
Fits standard 288-pin DDR4 slots
The VLP height eases installation in dense chassis or blade enclosures where vertical space is limited. One module occupies a single DIMM slot and leaves remaining channels free for matching sticks to reach the desired total capacity.
주요 특징
- 16 GB capacity expands workstation memory headroom
- DDR4 2400 speed delivers 19200 MT/s data throughput
- ECC support detects and corrects single-bit errors
- VLP form factor fits space-constrained server chassis
- 2 V operation reduces power draw per module
사양
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Server/Workstaion Compatible Series Memory |
| Model | Hynix DDR4 2666MHZ VLP ECC Unbuffered UDIMM |
| Part Number | ME19200-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Hynix |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 2666MHZ VLP ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 288-PIN VLP ECC Unbuffered UDIMM |
이 상품에 대한 질문
Does my motherboard need a 288-pin DDR4 slot and ECC support for this 16 GB module to function?
Yes, this 288-pin DDR4 UDIMM requires a motherboard with 288-pin DDR4 slots that also supports ECC unbuffered memory; without ECC support the module will not operate correctly.
Can I run this CL17 2400 MHz stick alongside my existing 2666 MHz DDR4 ECC modules without manual timing changes?
The system will automatically down-clock all modules to the slowest common speed, so the 2666 MHz sticks will run at 2400 MHz with CL17 timings when mixed with this module.
After installation, how do I confirm the module is recognised as 16 GB ECC at 2400 MHz?
Check the BIOS memory information screen or run a tool such as CPU-Z; it should show 16 GB capacity, DDR4-2400 frequency, CL17 latency and ECC enabled for this DIMM.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
