Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green bare circuit board DDR5 RDIMM memory module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 ECC RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-948A-04MRT

16 GB DDR5 4800 CL40 1Rx8 ECC RDIMM built for Supermicro H13SSL-NT servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

Näytä 24 muuta kokoonpanoa
  • Exact DDR5-4800 CL40 1Rx8 ECC RDIMM for full-speed recognition
  • Verified fit for Supermicro H13SSL-NT 288-pin registered slots
  • Registered ECC architecture prevents silent data corruption under load
  • Major OEM Samsung Micron Hynix chips ensure enterprise stability
  • Lifetime replacement warranty with US-based technical support

Exact-fit DDR5-4800 RDIMM for Supermicro H13SSL-NT

This 16GB DDR5 registered ECC module is built to the precise rank, voltage and timing the Supermicro H13SSL-NT memory controller expects. It installs as a single 288-pin RDIMM and runs at the rated 4800 MT/s without manual tuning. The 1Rx8 organisation matches the board's population rules so the full capacity is recognised immediately.

ECC and registered buffering protect production

On-die ECC detects and corrects single-bit errors before they reach applications, while the registered architecture reduces electrical load on the controller. Together they allow every slot to be populated at full capacity and rated speed, preventing silent data corruption and unplanned reboots in always-on environments.

DDR5-4800 JEDEC baseline limits peak bandwidth

The module operates at the standard 4800 MT/s JEDEC speed with CL40 latency and 1.1 V. Systems that require higher data rates or lower latencies cannot exceed this specification without replacing the memory, and mixed-speed populations will downclock to the slowest installed module.

Kohokohdat

  • Exact DDR5-4800 CL40 1Rx8 ECC RDIMM for full-speed recognition
  • Verified fit for Supermicro H13SSL-NT 288-pin registered slots
  • Registered ECC architecture prevents silent data corruption under load
  • Major OEM Samsung Micron Hynix chips ensure enterprise stability
  • Lifetime replacement warranty with US-based technical support

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 1Rx8 rank layout on this DDR5 RDIMM require any specific slot population on the Supermicro H13SSL-NT?

The 1Rx8 Registered ECC module follows the board's memory-population rules; consult the Supermicro H13SSL-NT manual for the approved DIMM installation order and supported capacities before installing.

Will the CL40 latency become a bottleneck when this DDR5 4800 module runs at full speed continuously?

CL40 is the rated CAS latency for DDR5 4800 operation; the registered buffer offloads the memory controller so every slot runs at the rated speed even when fully populated.

How much heat does the 1.10V DDR5 RDIMM generate during all-day server workloads without a heat spreader?

Operating at 1.10V, the module draws minimal power; the registered architecture reduces electrical load on the controller, keeping thermals manageable in standard server airflow without a dedicated heat spreader.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.