Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM 192GB (2 x 96GB) DDR5 4800 CL40 1.1V ECC Registered RDIMM memory upgrade for GIGABYTE MZ73-LM0

SKU CH-R7T0-CC0CE

192GB DDR5 4800 registered ECC kit with two 96GB modules for the GIGABYTE MZ73-LM0 motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Näytä 18 muuta kokoonpanoa
  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 4800 speed with CL40 latency for rated performance
  • ECC and registered design corrects errors and stabilises full populations
  • 1 V operation matches the motherboard's memory controller spec
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM0 exactly

Exact-match DDR5 server kit

This NEMIX RAM kit delivers 192GB in two 96GB DDR5-4800 registered ECC RDIMMs built to the GIGABYTE MZ73-LM0 motherboard's specifications. The modules run at 1.1V with CL40 timing and a 2Rx4 organisation that the board's memory controller expects.

Thermals and power profile

Operating at the standard DDR5 voltage of 1.10V, the registered architecture reduces electrical load on the memory controller when all slots are populated. No heat spreaders are fitted, so airflow across the 288-pin modules handles thermal dissipation in typical server chassis.

Build integration notes

The kit uses the 288-pin RDIMM form factor required by the MZ73-LM0 and will not fit UDIMM or SODIMM slots. Builders must consult the motherboard manual for supported population rules and maximum capacity per channel before installation. Buyers needing non-ECC unbuffered memory or a different capacity per module cannot use this kit.

Kohokohdat

  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 4800 speed with CL40 latency for rated performance
  • ECC and registered design corrects errors and stabilises full populations
  • 1 V operation matches the motherboard's memory controller spec
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM0 exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR5 RDIMM modules on the GIGABYTE MZ73-LM0 and what step is often missed?

Power down the server, open the chassis, and seat each 96GB RDIMM firmly into the 288-pin slots following the motherboard manual's population order; the step most often missed is confirming the exact slot sequence for a 2 x 96GB configuration so the memory controller recognises the full 192GB at DDR5 4800.

What maintenance or replacement will the 192GB DDR5 4800 ECC Registered kit need over its service life?

The modules have no heat spreaders and no moving parts, so routine maintenance is limited to keeping server airflow clean; if a single-bit error exceeds ECC correction or a module fails, the lifetime replacement warranty covers a direct swap of the affected 96GB RDIMM.

What limit appears first when the 2Rx4 Registered ECC RDIMMs run sustained workloads at 1.1V?

The registered buffer and on-die ECC keep signal integrity stable at the rated DDR5 4800 CL40, so the first practical limit is the motherboard's maximum supported capacity or slot count, not the memory's own thermal or electrical ceiling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.