Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 192GB (4 x 48GB) DDR5 5600 CL46 ECC UDIMM memory upgrade

SKU CH-JB87-0AQ3W

A 192 GB kit of four 48 GB DDR5 ECC UDIMMs running at 5600 MHz CL46 and 1.1 V, validated for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity for memory-intensive workloads
  • DDR5 5600 speed matches the controller's rated frequency
  • ECC protection corrects single-bit errors automatically
  • CL46 latency with 1.1 V operation per spec
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Exact-match DDR5 kit for Supermicro X14SAZ-TLN4F

This 192 GB kit contains four 48 GB DDR5 5600 UDIMM modules built to the board's exact specifications. It runs at CL46 with a 1.1 V supply and uses 2Rx8 unbuffered ECC chips so the memory controller recognises the full capacity at rated speed.

Upgrade from lower-capacity or non-ECC DDR5

The jump is worth it when your workload needs 192 GB of error-correcting memory and the motherboard population rules require four matched 2Rx8 UDIMMs. Systems limited to smaller kits or non-ECC modules cannot reach this capacity or protect data the same way.

Sustained-load behaviour with ECC active

Under continuous operation the ECC logic corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots. The unbuffered design keeps latency low while the 1.1 V operation maintains stable thermals across all four modules during extended sessions.

Kohokohdat

  • 192 GB total capacity for memory-intensive workloads
  • DDR5 5600 speed matches the controller's rated frequency
  • ECC protection corrects single-bit errors automatically
  • CL46 latency with 1.1 V operation per spec
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 288-pin DDR5 UDIMM modules fit the Supermicro X14SAZ-TLN4F motherboard slots?

Yes, the 288-pin DDR5 UDIMM form factor matches the memory slots on the Supermicro X14SAZ-TLN4F motherboard, which requires unbuffered ECC DDR5 modules.

What is the correct installation order for the four 48GB modules on the Supermicro X14SAZ-TLN4F?

Install the four 48GB modules following the motherboard manual's DIMM population sequence for 2Rx8 unbuffered ECC memory to ensure the full 192GB capacity is recognised at DDR5-5600.

Do these DDR5 ECC UDIMMs require any firmware updates or ongoing maintenance after installation?

No firmware updates are needed for the memory itself; ensure the motherboard BIOS is current for DDR5-5600 support, then the ECC function operates automatically without further maintenance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.