We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 192GB (4 x 48GB) DDR5 5600 CL46 ECC UDIMM memory upgrade

SKU CH-JB87-0AQ3W

A 192 GB kit of four 48 GB DDR5 ECC UDIMMs running at 5600 MHz CL46 and 1.1 V, validated for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

  • 192 GB total capacity for memory-intensive workloads
  • DDR5 5600 speed matches the controller's rated frequency
  • ECC protection corrects single-bit errors automatically
  • CL46 latency with 1.1 V operation per spec
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Exact-match DDR5 kit for Supermicro X14SAZ-TLN4F

This 192 GB kit contains four 48 GB DDR5 5600 UDIMM modules built to the board's exact specifications. It runs at CL46 with a 1.1 V supply and uses 2Rx8 unbuffered ECC chips so the memory controller recognises the full capacity at rated speed.

Upgrade from lower-capacity or non-ECC DDR5

The jump is worth it when your workload needs 192 GB of error-correcting memory and the motherboard population rules require four matched 2Rx8 UDIMMs. Systems limited to smaller kits or non-ECC modules cannot reach this capacity or protect data the same way.

Sustained-load behaviour with ECC active

Under continuous operation the ECC logic corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots. The unbuffered design keeps latency low while the 1.1 V operation maintains stable thermals across all four modules during extended sessions.

Highlights

  • 192 GB total capacity for memory-intensive workloads
  • DDR5 5600 speed matches the controller's rated frequency
  • ECC protection corrects single-bit errors automatically
  • CL46 latency with 1.1 V operation per spec
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin DDR5 UDIMM modules fit the Supermicro X14SAZ-TLN4F motherboard slots?

Yes, the 288-pin DDR5 UDIMM form factor matches the memory slots on the Supermicro X14SAZ-TLN4F motherboard, which requires unbuffered ECC DDR5 modules.

What is the correct installation order for the four 48GB modules on the Supermicro X14SAZ-TLN4F?

Install the four 48GB modules following the motherboard manual's DIMM population sequence for 2Rx8 unbuffered ECC memory to ensure the full 192GB capacity is recognised at DDR5-5600.

Do these DDR5 ECC UDIMMs require any firmware updates or ongoing maintenance after installation?

No firmware updates are needed for the memory itself; ensure the motherboard BIOS is current for DDR5-5600 support, then the ECC function operates automatically without further maintenance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.