We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips, no heat spreaders, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM DDR5 5600 ECC UDIMM 64GB 2x32GB CL46 1.1V 2Rx8 Supermicro X14SAZ-F memory upgrade

SKU CH-99PM-CTPKC

64 GB DDR5 ECC UDIMM kit running at 5600 MT/s with CL46 latency and 1.1 V for Supermicro X14SAZ-F motherboards

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • Exact DDR5-5600 CL46 1.1V 2Rx8 match lets the controller recognise full 64GB at rated speed
  • Verified fit for Supermicro X14SAZ-F 288-pin UDIMM slots avoids population-rule mismatches
  • Dual-rank 2Rx8 organisation increases bank density for higher throughput per channel
  • Lifetime replacement coverage with US-based technical support protects your investment

Exact-match DDR5-5600 ECC UDIMM kit

This 64 GB kit (2 × 32 GB) is built for the Supermicro X14SAZ-F motherboard. It delivers DDR5-5600 (PC5-44800) speed at 1.10 V with CL46 timing in the unbuffered ECC form factor that board requires.

Capacity and headroom

Two 32 GB 2Rx8 modules fill two slots for 64 GB total, giving workstations room for virtualization, large datasets or multi-user services. Adding more memory would need free DIMM slots and a motherboard that supports higher per-slot density.

Build and daily fit

Modules use major-brand Samsung, Micron or Hynix chips without heat spreaders, keeping the standard 288-pin UDIMM height for dense server chassis. The unbuffered ECC design plugs straight into the board — no registered DIMM or SODIMM confusion — and ECC corrects single-bit errors on the fly.

Highlights

  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • Exact DDR5-5600 CL46 1.1V 2Rx8 match lets the controller recognise full 64GB at rated speed
  • Verified fit for Supermicro X14SAZ-F 288-pin UDIMM slots avoids population-rule mismatches
  • Dual-rank 2Rx8 organisation increases bank density for higher throughput per channel
  • Lifetime replacement coverage with US-based technical support protects your investment

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this DDR5-5600 CL46 ECC UDIMM kit run correctly if I keep my existing 32GB DDR5-4800 modules in the other slots?

Mixing different speeds forces all modules to run at the lowest common speed, so the 5600 kit would downclock to 4800. For full rated performance and stability, populate all slots with identical DDR5-5600 CL46 2Rx8 modules.

How can I verify the kit is operating at DDR5-5600 with ECC active after installation?

Enter the BIOS and confirm the memory frequency reads 5600 MT/s, CL46 timings, 1.1V voltage, and that ECC status shows enabled. The Supermicro X14SAZ-F POST screen also reports total capacity and ECC function.

Does the 64GB kit include only the two 32GB UDIMMs or are there extra parts I need to buy?

The box contains exactly the two 32GB DDR5-5600 ECC UDIMMs (part ME44800-328K2). No heat spreaders, cables, or additional hardware are included or required for installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.