NEMIX RAM 192GB (4x48GB) DDR5 4800 CL40 1.1V 288-pin UDIMM memory upgrade
- 192GB (4 x 48GB)
- DDR5 4800 (PC5 3840…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
128 GB DDR5 ECC UDIMM kit (four 32 GB modules at 5600 MT/s, CL46, 1.1 V) validated for the Supermicro X14SAE motherboard
Size 128GB 4X32GB
This NEMIX RAM kit provides 128GB of DDR5 memory across four 32GB unbuffered ECC UDIMMs. It operates at 5600MHz with CL46 latency at 1.1V. The modules use a 2Rx8 rank configuration and 288-pin form factor. They are built with major OEM chips from Samsung, Micron, or Hynix and have no heat spreader.
This kit is spec-matched for the Supermicro X14SAE motherboard requiring DDR5 5600 ECC unbuffered UDIMMs. ECC corrects single-bit errors to prevent data corruption and crashes. Builders needing registered RDIMMs, SODIMMs, non-ECC memory, or a different speed grade should look elsewhere. Verify your manual for population rules and maximum supported capacity before buying.
The memory controller on the X14SAE expects a 2Rx8 organization at 1.1V to train at the rated 5600MHz. Using modules with a different rank structure or voltage will prevent the system from recognizing the full 128GB capacity or running at the specified speed. This kit matches those exact electrical and timing parameters.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 ECC Unbuffered UDIMM Memory |
| Part Number | ME44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 ECC UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit runs at 5600 MT/s with CL46 latency, giving the board its rated PC5-44800 bandwidth per module.
Yes, each module is a 288-pin unbuffered ECC UDIMM, the exact form factor the motherboard's slots accept.
The modules have no heat spreader, so they occupy standard UDIMM height and install directly into the board's four slots.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?