We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 4800 CL40 1.1V 288-pin UDIMM memory upgrade

SKU CH-S376-NRE2D

A 192 GB DDR5 kit of four 48 GB unbuffered UDIMMs running at 4800 MT/s CL40 and 1.1 V for Supermicro workstations

  • Capacity192GB (4 x 48GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 192GB 4X48GB

  • 192 GB total capacity across four 48 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 CAS latency at 1.1 V operating voltage
  • 288-pin UDIMM form factor fits desktop workstations
  • 2Rx8 dual-rank organisation using major OEM DRAM chips

SuperMicro DDR5 4800 192GB Kit

This 192GB kit contains four 48GB DDR5 4800 UDIMM modules built for SuperMicro desktop workstations. It targets professionals who need high-capacity memory for memory-intensive applications on compatible platforms. The modules operate at 1.1V with CL40 latency and use a 2Rx8 organization without ECC or heat spreaders.

Sustained Load Stability

All modules are rigorously stress tested under load to ensure reliability during extended workloads. The 1.1V operating voltage helps maintain consistent thermal behaviour across the four DIMMs when the system runs at full capacity for long periods. Unbuffered topology keeps the signal path direct for predictable timing under continuous pressure.

DDR5 UDIMM Platform Limits

The 288-pin DDR5 UDIMM standard defines the electrical and mechanical interface used by this kit. Maximum capacity and speed depend on the motherboard memory controller and qualified vendor list rather than the modules alone. Builders must verify that their specific SuperMicro board supports 48GB density per slot at 4800 MT/s before installation.

Highlights

  • 192 GB total capacity across four 48 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • CL40 CAS latency at 1.1 V operating voltage
  • 288-pin UDIMM form factor fits desktop workstations
  • 2Rx8 dual-rank organisation using major OEM DRAM chips

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-4828K4
Capacity192GB (4 x 48GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB (4X48GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.10V DDR5 4800 kit draw under sustained load?

Each 48GB module runs at 1.10V, so the four-module 192GB kit stays at the standard DDR5 1.10V operating voltage during continuous use.

Which motherboard slots and chipset are required for the 288-pin UDIMM kit to function?

The kit needs a motherboard with four 288-pin DDR5 UDIMM slots and a chipset that supports DDR5 4800 non-ECC unbuffered memory, such as the Supermicro C9Z790-CGW board.

Will the CL40 2Rx8 modules run stably alongside any existing DDR5 4800 sticks I keep?

Mixing is reliable only when the retained sticks are also DDR5 4800 CL40 2Rx8 1.10V non-ECC unbuffered UDIMMs; otherwise the system will default to the slowest common timing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.