Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Four green DDR5 ECC UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4 x 32GB) DDR5 5600 ECC UDIMM Supermicro X14SAE memory upgrade

SKU CH-XEXJ-EDFAE

128 GB DDR5 ECC UDIMM kit (four 32 GB modules at 5600 MT/s, CL46, 1.1 V) validated for the Supermicro X14SAE motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB total capacity with four 32 GB modules for full system memory upgrade
  • DDR5 5600 speed rated at PC5-44800 for rated data transfer performance
  • ECC error correction detects and corrects single-bit errors to protect data integrity
  • 2Rx8 unbuffered UDIMM at 1.1 V matches the motherboard's memory controller requirements
  • 288-pin form factor fits Supermicro X14SAE DDR5 ECC UDIMM slots exactly

128GB DDR5 ECC UDIMM kit

This NEMIX RAM kit provides 128GB of DDR5 memory across four 32GB unbuffered ECC UDIMMs. It operates at 5600MHz with CL46 latency at 1.1V. The modules use a 2Rx8 rank configuration and 288-pin form factor. They are built with major OEM chips from Samsung, Micron, or Hynix and have no heat spreader.

For Supermicro X14SAE workstations

This kit is spec-matched for the Supermicro X14SAE motherboard requiring DDR5 5600 ECC unbuffered UDIMMs. ECC corrects single-bit errors to prevent data corruption and crashes. Builders needing registered RDIMMs, SODIMMs, non-ECC memory, or a different speed grade should look elsewhere. Verify your manual for population rules and maximum supported capacity before buying.

2Rx8 rank and 1.1V voltage

The memory controller on the X14SAE expects a 2Rx8 organization at 1.1V to train at the rated 5600MHz. Using modules with a different rank structure or voltage will prevent the system from recognizing the full 128GB capacity or running at the specified speed. This kit matches those exact electrical and timing parameters.

Najważniejsze cechy

  • 128 GB total capacity with four 32 GB modules for full system memory upgrade
  • DDR5 5600 speed rated at PC5-44800 for rated data transfer performance
  • ECC error correction detects and corrects single-bit errors to protect data integrity
  • 2Rx8 unbuffered UDIMM at 1.1 V matches the motherboard's memory controller requirements
  • 288-pin form factor fits Supermicro X14SAE DDR5 ECC UDIMM slots exactly

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What does DDR5-5600 CL46 mean for actual throughput on the Supermicro X14SAE?

The kit runs at 5600 MT/s with CL46 latency, giving the board its rated PC5-44800 bandwidth per module.

Does this kit use the 288-pin DDR5 UDIMM interface the X14SAE requires?

Yes, each module is a 288-pin unbuffered ECC UDIMM, the exact form factor the motherboard's slots accept.

Will the four 32 GB sticks fit the X14SAE's DIMM slots without a heat spreader?

The modules have no heat spreader, so they occupy standard UDIMM height and install directly into the board's four slots.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.