Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 1TB (16x64GB) DDR5 4800 CL40 2Rx4 1.1V 288-Pin ECC Registered RDIMM Kit for Supermicro H14DST-F

SKU CH-87FX-X44Z3

A 1 TB DDR5 server memory kit of sixteen 64 GB registered ECC RDIMMs running at 4800 MT/s with CL40 latency and 1.1 V for the Supermicro H14DST-F motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 1TB kit fully populates 16 DIMM slots at rated speed
  • DDR5-4800 CL40 2Rx4 registered ECC matches controller specs
  • 1V operation reduces power draw across all modules
  • ECC corrects single-bit errors preventing silent data corruption
  • Verified fit for Supermicro H14DST-F 288-pin RDIMM layout

1 TB DDR5-4800 ECC RDIMM kit for Supermicro H14DST-F

This 1 TB kit contains sixteen 64 GB modules built to DDR5-4800 PC5-38400 CL40 1.10 V 2Rx4 registered ECC specification. The 288-pin RDIMM form factor matches the memory slots on the Supermicro H14DST-F motherboard so the system recognises the full capacity at rated speed.

Who this suits and who it does not

Suits administrators upgrading a Supermicro H14DST-F platform that requires registered ECC DDR5 RDIMMs populated across all channels. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC memory or a different DDR generation cannot use this kit.

The specification that decides compatibility

The motherboard must accept 2Rx4 registered ECC DDR5 RDIMMs at 1.10 V with CL40 timing; if the platform documentation calls for a different rank, voltage or form factor the modules will not operate correctly.

Kohokohdat

  • 1TB kit fully populates 16 DIMM slots at rated speed
  • DDR5-4800 CL40 2Rx4 registered ECC matches controller specs
  • 1V operation reduces power draw across all modules
  • ECC corrects single-bit errors preventing silent data corruption
  • Verified fit for Supermicro H14DST-F 288-pin RDIMM layout

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the Supermicro H14DST-F require any specific DIMM population order for this 16-module 1TB kit?

The kit contains 16 identical 64GB DDR5 4800 CL40 2Rx4 RDIMMs at 1.1V; consult the motherboard manual for the exact slot-filling sequence to reach full capacity.

Will these registered ECC DDR5 modules operate at their rated speed when all 16 slots of the H14DST-F are populated?

The registered architecture is designed to maintain DDR5-4800 (PC5-38400) operation across a fully populated server, and ECC corrects single-bit errors in real time.

How can I confirm the kit is running at DDR5 4800 CL40 with ECC active after installation?

Check the BIOS memory information or OS tools such as dmidecode for speed PC5-38400, CAS latency 40, voltage 1.1V, and ECC status enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.