NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
24 GB DDR5 5600 registered ECC module with 2Rx8 organisation, CL46 latency and 1.1 V operation
This NEMIX RAM module delivers 24GB of DDR5 5600 registered ECC memory for enterprise servers. It operates at 1.1V with a CAS latency of 46 and a 2Rx8 rank configuration. The 288-pin RDIMM form factor fits registered DIMM slots in compatible server platforms. It is not for standard PC computers.
Replacing smaller DDR5 registered modules with this 24GB stick increases total memory capacity without adding slots. The jump is worthwhile when workloads exceed current RAM limits or when populating empty slots to reach target capacity. Systems already at maximum supported density or speed gain no benefit.
Align the module key with the DDR5 RDIMM slot and press firmly until the latches engage. Common issues include mixing registered and unbuffered DIMMs, exceeding the platform's maximum rank-per-channel limit, or populating slots in an order the firmware does not support. Verify the server's qualified vendor list before installing.
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MR44800-2428K1-SM-AS-1115HS-TNR |
| Part Number | Part#: MR44800-2428K1-SM-AS-1115HS-TNR |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Yes, the module uses the 288-pin DDR5 RDIMM form factor that matches standard server memory slots; verify your platform supports DDR5 5600 registered ECC before installing.
Align the key notch with the slot, press firmly until both side latches click, then confirm the system detects the full 24 GB at 5600 MT/s — skipping the latch check is the common error.
Replace the module if ECC logs show rising correctable-error counts, if memory diagnostics report uncorrectable faults, or when a platform upgrade requires a different speed or capacity.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?