We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM 24GB DDR5 5600 ECC RDIMM 1Rx8 1.1V 288-pin server RAM

SKU CH-GSRV-ZW04X

24 GB DDR5 5600 registered ECC module with 2Rx8 organisation, CL46 latency and 1.1 V operation

  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Rank2Rx8
  • ECC protection prevents data corruption in critical workloads
  • 5600 MT/s DDR5 speed handles demanding server tasks
  • 1 V operation reduces power draw per module
  • Registered design stabilises signal integrity on multi-DIMM boards
  • 24 GB single-module capacity simplifies capacity scaling

Server DDR5 ECC RDIMM 24GB

This NEMIX RAM module delivers 24GB of DDR5 5600 registered ECC memory for enterprise servers. It operates at 1.1V with a CAS latency of 46 and a 2Rx8 rank configuration. The 288-pin RDIMM form factor fits registered DIMM slots in compatible server platforms. It is not for standard PC computers.

Upgrading from lower-capacity DDR5 RDIMMs

Replacing smaller DDR5 registered modules with this 24GB stick increases total memory capacity without adding slots. The jump is worthwhile when workloads exceed current RAM limits or when populating empty slots to reach target capacity. Systems already at maximum supported density or speed gain no benefit.

Straightforward slot installation

Align the module key with the DDR5 RDIMM slot and press firmly until the latches engage. Common issues include mixing registered and unbuffered DIMMs, exceeding the platform's maximum rank-per-channel limit, or populating slots in an order the firmware does not support. Verify the server's qualified vendor list before installing.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • 5600 MT/s DDR5 speed handles demanding server tasks
  • 1 V operation reduces power draw per module
  • Registered design stabilises signal integrity on multi-DIMM boards
  • 24 GB single-module capacity simplifies capacity scaling

Specifications

BrandNEMIX RAM
ModelPart#: MR44800-2428K1-SM-AS-1115HS-TNR
Part NumberPart#: MR44800-2428K1-SM-AS-1115HS-TNR
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Questions about this item

Does the 288-pin DDR5 ECC RDIMM fit standard server DIMM slots?

Yes, the module uses the 288-pin DDR5 RDIMM form factor that matches standard server memory slots; verify your platform supports DDR5 5600 registered ECC before installing.

What is the correct seating procedure for this 2Rx8 registered module, and what step is often missed?

Align the key notch with the slot, press firmly until both side latches click, then confirm the system detects the full 24 GB at 5600 MT/s — skipping the latch check is the common error.

When should the 24 GB DDR5 5600 ECC RDIMM be replaced or serviced?

Replace the module if ECC logs show rising correctable-error counts, if memory diagnostics report uncorrectable faults, or when a platform upgrade requires a different speed or capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.