Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5-5600 CL46 ECC RDIMM Supermicro H14SSL-N

SKU CH-M95K-GZNP6

256 GB registered ECC DDR5 kit in four 64 GB modules running at 5600 MT/s CL46 for the Supermicro H14SSL-N motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from four 64 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation at 2Rx4 rank aligns with Supermicro H14SSL-N requirements
  • 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects

256GB DDR5-5600 ECC RDIMM Kit

This 256GB kit contains four 64GB DDR5-5600 modules built to the PC5-44800 standard. Each stick is a 288-pin Registered DIMM with ECC, 2Rx4 organisation, CL46 latency and 1.10V operation. The memory is validated for the Supermicro H14SSL-N motherboard so the controller recognises the full capacity at rated speed.

Who this suits and who it does not

Ideal for administrators expanding a Supermicro H14SSL-N platform to its maximum supported memory with registered ECC modules. Not suitable for systems that require unbuffered UDIMMs, SODIMM form factors, non-ECC memory or a different DDR generation.

The spec that decides fit

The motherboard must accept 288-pin DDR5 RDIMMs with 2Rx4 ranking, 1.10V voltage and CL46 timing at 5600 MT/s; otherwise the kit will not post or will run at reduced capacity.

Kohokohdat

  • 256 GB total capacity from four 64 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation at 2Rx4 rank aligns with Supermicro H14SSL-N requirements
  • 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Do I need a Supermicro H14SSL-N motherboard with available 288-pin RDIMM slots to install this 256GB kit?

Yes, this 4x64GB DDR5-5600 CL46 registered ECC kit is built for the Supermicro H14SSL-N and requires four empty 288-pin RDIMM slots running at 1.10V.

Will the memory controller on my H14SSL-N run all four 2Rx4 modules at the rated 5600 MT/s?

The kit matches the board's specified rank, voltage and timing so the controller recognises the full 256GB at DDR5-5600 (PC5-44800) without downclocking.

How can I confirm the system sees all 256GB at CL46 after installation?

Enter the BIOS or use a hardware inventory tool; it should report 256GB total, DDR5-5600 speed, CL46 latency and ECC registered status for each DIMM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.