We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in a clear plastic tray

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5-5600 CL46 ECC RDIMM Supermicro H14SSL-N

SKU CH-M95K-GZNP6

256 GB registered ECC DDR5 kit in four 64 GB modules running at 5600 MT/s CL46 for the Supermicro H14SSL-N motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Show 24 more configurations
  • 256 GB total capacity from four 64 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation at 2Rx4 rank aligns with Supermicro H14SSL-N requirements
  • 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects

256GB DDR5-5600 ECC RDIMM Kit

This 256GB kit contains four 64GB DDR5-5600 modules built to the PC5-44800 standard. Each stick is a 288-pin Registered DIMM with ECC, 2Rx4 organisation, CL46 latency and 1.10V operation. The memory is validated for the Supermicro H14SSL-N motherboard so the controller recognises the full capacity at rated speed.

Who this suits and who it does not

Ideal for administrators expanding a Supermicro H14SSL-N platform to its maximum supported memory with registered ECC modules. Not suitable for systems that require unbuffered UDIMMs, SODIMM form factors, non-ECC memory or a different DDR generation.

The spec that decides fit

The motherboard must accept 288-pin DDR5 RDIMMs with 2Rx4 ranking, 1.10V voltage and CL46 timing at 5600 MT/s; otherwise the kit will not post or will run at reduced capacity.

Highlights

  • 256 GB total capacity from four 64 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation at 2Rx4 rank aligns with Supermicro H14SSL-N requirements
  • 288-pin RDIMM form factor fits the exact DIMM slots your motherboard expects

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do I need a Supermicro H14SSL-N motherboard with available 288-pin RDIMM slots to install this 256GB kit?

Yes, this 4x64GB DDR5-5600 CL46 registered ECC kit is built for the Supermicro H14SSL-N and requires four empty 288-pin RDIMM slots running at 1.10V.

Will the memory controller on my H14SSL-N run all four 2Rx4 modules at the rated 5600 MT/s?

The kit matches the board's specified rank, voltage and timing so the controller recognises the full 256GB at DDR5-5600 (PC5-44800) without downclocking.

How can I confirm the system sees all 256GB at CL46 after installation?

Enter the BIOS or use a hardware inventory tool; it should report 256GB total, DDR5-5600 speed, CL46 latency and ECC registered status for each DIMM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.