We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 256GB 8x32GB CL46 ECC RDIMM H13SSL-N memory upgrade

SKU CH-C7SD-RYVVK

256GB eight-module DDR5 5600 ECC registered RDIMM kit validated for Supermicro H13SSL-N motherboards

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Show 24 more configurations
  • 256 GB total capacity from eight 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 10 V operation matches server memory controller requirements
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H13SSL-N

Exact-match 256 GB DDR5 kit for Supermicro H13SSL-N

This 256 GB kit contains eight 32 GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the H13SSL-N memory controller expects. It is intended for administrators upgrading that specific Supermicro server platform.

288-pin Registered DDR5 form factor

The modules use the 288-pin RDIMM form factor this board requires, not UDIMM or SODIMM, and operate at 1.1 V with CL46 latency. Full-capacity operation depends on following the motherboard manual for supported capacities and approved DIMM population order.

2Rx8 Registered ECC architecture decides fit

The dual-rank Registered design with on-die ECC offloads the memory controller and corrects single-bit errors, enabling every slot to run fully populated at the rated 5600 MT/s. Systems needing unbuffered memory or a different rank configuration cannot use this kit.

Highlights

  • 256 GB total capacity from eight 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 10 V operation matches server memory controller requirements
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H13SSL-N

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick this 8 x 32 GB kit or a smaller capacity for my Supermicro H13SSL-N?

The 256 GB kit fills eight slots with 32 GB modules at the rated DDR5 5600 speed; choose it when your workload needs the maximum supported capacity and your board’s population rules allow all eight DIMMs.

What does the DDR5 5600 rating deliver once the modules are installed in the server?

The memory controller will run the kit at 5600 MT/s with CL46 timing at 1.1 V, giving the full rated bandwidth of PC5-44800 across all populated channels.

How does the 288-pin RDIMM interface limit or enable performance on the H13SSL-N?

The registered 288-pin RDIMM format buffers address and command signals, letting the motherboard run all eight slots at the full DDR5 5600 data rate without signal-integrity loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.