We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules, bare circuit boards with black chips, 288 pins each

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1Rx8 ECC RDIMM Supermicro H13SSL-N

SKU CH-EXK3-356KC

A 64GB kit of four 16GB DDR5 5600 CL46 ECC registered RDIMMs built for the Supermicro H13SSL-N motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Show 24 more configurations
  • 64 GB capacity across four 16 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on Supermicro H13SSL-N
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operation at 1Rx8 rank matches board memory-controller requirements exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every slot

Exact-match server kit

This 64 GB kit contains four 16 GB DDR5 5600 RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSL-N expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It is not for buyers who need unbuffered UDIMMs or SODIMM form factors.

DDR5 5600 registered limits

DDR5 5600 RDIMMs operate at 1.1 V with a CL46 latency ceiling that the memory controller enforces. Registered buffering offloads the controller so all four slots stay stable at full capacity, but the standard does not support mixing with unbuffered or consumer modules. Populations beyond the board's validated rules will not train at rated speed.

Straightforward slot installation

Align the 288-pin key, press evenly until the latches click, and follow the motherboard manual for the approved population order. The most common issue is skipping the manual's slot sequence, which prevents the kit from being recognised at 64 GB. No heat spreader means clearance is rarely a concern in standard server chassis.

Highlights

  • 64 GB capacity across four 16 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput on Supermicro H13SSL-N
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operation at 1Rx8 rank matches board memory-controller requirements exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit in every slot

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 4x16GB kit or a different capacity for my Supermicro H13SSL-N?

The 64GB kit provides four 16GB DDR5 5600 CL46 1Rx8 ECC RDIMM modules at 1.1V. This exact configuration matches the motherboard's memory population rules for full-capacity operation.

What does DDR5 5600 (PC5-44800) mean for actual server performance?

The modules run at 5600 MT/s with CL46 latency and 1.1V. Registered ECC architecture lets all four slots operate at rated speed while correcting single-bit errors to prevent data corruption and unplanned reboots.

Will the 288-pin RDIMM interface work with my H13SSL-N memory controller?

Yes. The 288-pin Registered DDR5 RDIMM form factor is exactly what the Supermicro H13SSL-N requires. The 1Rx8 rank structure and 1.1V voltage match the board's memory controller expectations for full recognition.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.