We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 5600 CL46 2Rx4 ECC Registered RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-VVXX-X6EBP

A 128 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMM kit built for the Supermicro H13SSL-N motherboard

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128 GB capacity for memory-intensive workloads via 2×64 GB DDR5-5600 kit
  • ECC and registered design corrects single-bit errors and stabilises fully populated channels
  • CL46 latency at 1.1 V matches the Supermicro H13SSL-N memory controller spec
  • 2Rx4 rank organisation enables full-speed operation across all populated slots
  • 288-pin RDIMM form factor fits the board's DDR5 registered DIMM sockets

128GB DDR5 ECC RDIMM kit for Supermicro H13SSL-N

This 128GB kit contains two 64GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro H13SSL-N motherboard. Each module runs at 1.1V with CL46 latency and a 2Rx4 organisation. The registered buffer lets the memory controller drive a fully populated configuration at rated speed while ECC corrects single-bit errors in flight.

Who this suits and who should look elsewhere

Server administrators upgrading a Supermicro H13SSL-N platform that requires registered DDR5 RDIMMs with ECC will find the exact rank, voltage and timing the board expects. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC modules or a different capacity per DIMM cannot use this kit.

The specification that decides fitment

The motherboard must accept 288-pin DDR5 Registered DIMMs at 5600 MT/s with a 2Rx4 rank structure and 1.1V operating voltage. If the system documentation calls for a different rank, voltage or form factor, the modules will not be recognised or will run at reduced performance.

Highlights

  • 128 GB capacity for memory-intensive workloads via 2×64 GB DDR5-5600 kit
  • ECC and registered design corrects single-bit errors and stabilises fully populated channels
  • CL46 latency at 1.1 V matches the Supermicro H13SSL-N memory controller spec
  • 2Rx4 rank organisation enables full-speed operation across all populated slots
  • 288-pin RDIMM form factor fits the board's DDR5 registered DIMM sockets

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will these 2Rx4 registered ECC DDR5 modules work with my Supermicro H13SSL-N motherboard?

The kit is validated for the Supermicro H13SSL-N motherboard and uses the 288-pin RDIMM form factor that board requires.

Does the H13SSL-N need any specific DIMM population order for this 128 GB kit?

Consult your motherboard manual for supported capacities and approved DIMM population order before installation.

How can I confirm the kit runs at DDR5 5600 CL46 after installation?

Check the BIOS memory information or OS memory diagnostics to verify speed shows 5600 MT/s and CAS latency 46.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.