We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 256GB (2×128GB) DDR5 4800 PC5-38400 CL40 1.1V 2Rx4 288-pin ECC RDIMM kit Supermicro H13SST-GC

SKU CH-ES9G-NY7A7

256 GB DDR5-4800 registered ECC RDIMM kit (2 × 128 GB, CL40, 1.1 V, 2Rx4) validated for the Supermicro H13SST-GC motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Show 24 more configurations
  • Exact-match 256 GB kit installs at full rated DDR5-4800 speed
  • Registered ECC RDIMM design prevents silent data corruption under load
  • Verified fitment for Supermicro H13SST-GC motherboard
  • Dual-rank 2Rx4 organisation enables full-capacity population per slot
  • 10 V operation matches the board's memory-controller specification

256 GB DDR5 ECC RDIMM kit for Supermicro H13SST-GC

This 256 GB kit contains two 128 GB registered DDR5 modules built for the Supermicro H13SST-GC motherboard. The 288-pin RDIMM form factor matches the board's slot requirements exactly. Registered buffering and on-die ECC protect data integrity in multi-socket server workloads. It is not suited for desktops or workstations that accept only unbuffered UDIMMs.

2 × 128 GB at DDR5-4800 CL40 1.1 V 2Rx4

Each module runs at 4800 MT/s with a CAS latency of 40 at the standard 1.1 V. The dual-rank 2Rx4 organisation lets the memory controller address the full 256 GB across both slots. Population rules for the H13SST-GC determine whether additional kits can be added; consult the motherboard manual for supported configurations and slot order. Systems needing higher bandwidth or lower latency will require faster-rated modules.

Registered ECC RDIMM form factor decides

The 288-pin registered DIMM with ECC is the single specification that determines whether this kit works in your server. Only motherboards wired for DDR5 RDIMMs with registered buffering and error correction will recognise the modules at full capacity and rated speed. Verify the H13SST-GC memory population table before purchase.

Highlights

  • Exact-match 256 GB kit installs at full rated DDR5-4800 speed
  • Registered ECC RDIMM design prevents silent data corruption under load
  • Verified fitment for Supermicro H13SST-GC motherboard
  • Dual-rank 2Rx4 organisation enables full-capacity population per slot
  • 10 V operation matches the board's memory-controller specification

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx4 registered ECC DDR5-4800 modules work alongside other DDR5 RDIMMs already installed in the Supermicro H13SST-GC?

The board requires registered DDR5 RDIMMs. Mixing kits with different ranks, speeds, or voltages can prevent the system from training at 4800 MT/s. For reliable operation, populate all channels with identical 2Rx4 1.1V CL40 modules and follow the manual's population order.

How can I confirm the kit is running at DDR5-4800 with CL40 timings and ECC active after installation?

Enter the BIOS and verify the memory frequency reads 4800 MT/s, CAS latency shows 40, voltage is 1.10 V, and ECC status is enabled. The Supermicro POST screen also reports total capacity as 256 GB when both 128 GB modules are recognised.

What comes in the box and do I need any extra brackets or cables for the Supermicro H13SST-GC?

The kit contains two 128 GB DDR5 288-pin registered ECC RDIMMs. No heat spreaders, brackets, cables, or additional hardware are included. The modules install directly into the motherboard's DDR5 RDIMM slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.