Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 UDIMM sticks without heat spreaders, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2933 CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-8N1R-Q14CT

A 32 GB DDR4 kit with two 16 GB UDIMMs running at 2933 MHz CL21 1.20 V for Supermicro boards

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB total capacity from two 16 GB modules
  • DDR4 2933 speed rated at PC4-23400
  • CL21 CAS latency for responsive timing
  • 2 V low-voltage operation saves power
  • Validated for Supermicro desktop and workstation boards

System Specific DDR4 Upgrade

This NEMIX RAM kit provides 32 GB of DDR4 memory in a matched pair of 16 GB UDIMMs. It is built for Supermicro desktop and workstation boards that accept non-ECC unbuffered modules at 2933 MT/s. The kit arrives new and ready to install.

Suits Supermicro DDR4 builds.

Builders upgrading a compatible Supermicro C9X299-PGF or similar platform can use this kit to reach 32 GB with CL21 timing at 1.20 V. Systems that require ECC, registered DIMMs, or a different DDR generation will not accept these modules.

2933 MT/s DDR4 UDIMM speed and form factor

The decisive specification is the DDR4 2933 (PC4-23400) rating in a 288-pin unbuffered UDIMM package. Only motherboards that support this exact speed, voltage, and non-ECC layout will run the kit at its rated settings.

Kohokohdat

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2933 speed rated at PC4-23400
  • CL21 CAS latency for responsive timing
  • 2 V low-voltage operation saves power
  • Validated for Supermicro desktop and workstation boards

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Kysymyksiä tästä tuotteesta

Should I choose the 2 x 16 GB kit or a single 32 GB module?

This product is only sold as a matched 2 x 16 GB kit; a single 32 GB module is not offered.

What does the 2933 MHz rating deliver in a Supermicro workstation?

It runs at DDR4 2933 with CL21 timing, providing the rated PC4-23400 bandwidth when the motherboard supports that speed.

Does the 288-pin DDR4 UDIMM interface limit capacity or speed?

The 288-pin UDIMM form factor accepts this 32 GB kit at 2933 MHz; higher capacities or speeds would need a different module type.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.