We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM sticks without heat spreaders, 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2933 CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-8N1R-Q14CT

A 32 GB DDR4 kit with two 16 GB UDIMMs running at 2933 MHz CL21 1.20 V for Supermicro boards

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB total capacity from two 16 GB modules
  • DDR4 2933 speed rated at PC4-23400
  • CL21 CAS latency for responsive timing
  • 2 V low-voltage operation saves power
  • Validated for Supermicro desktop and workstation boards

System Specific DDR4 Upgrade

This NEMIX RAM kit provides 32 GB of DDR4 memory in a matched pair of 16 GB UDIMMs. It is built for Supermicro desktop and workstation boards that accept non-ECC unbuffered modules at 2933 MT/s. The kit arrives new and ready to install.

Suits Supermicro DDR4 builds.

Builders upgrading a compatible Supermicro C9X299-PGF or similar platform can use this kit to reach 32 GB with CL21 timing at 1.20 V. Systems that require ECC, registered DIMMs, or a different DDR generation will not accept these modules.

2933 MT/s DDR4 UDIMM speed and form factor

The decisive specification is the DDR4 2933 (PC4-23400) rating in a 288-pin unbuffered UDIMM package. Only motherboards that support this exact speed, voltage, and non-ECC layout will run the kit at its rated settings.

Highlights

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2933 speed rated at PC4-23400
  • CL21 CAS latency for responsive timing
  • 2 V low-voltage operation saves power
  • Validated for Supermicro desktop and workstation boards

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

Should I choose the 2 x 16 GB kit or a single 32 GB module?

This product is only sold as a matched 2 x 16 GB kit; a single 32 GB module is not offered.

What does the 2933 MHz rating deliver in a Supermicro workstation?

It runs at DDR4 2933 with CL21 timing, providing the rated PC4-23400 bandwidth when the motherboard supports that speed.

Does the 288-pin DDR4 UDIMM interface limit capacity or speed?

The 288-pin UDIMM form factor accepts this 32 GB kit at 2933 MHz; higher capacities or speeds would need a different module type.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.