NEMIX RAM
NEMIX RAM 32GB DDR4 3200 CL22 260-PIN SODIMM memory upgrade for POSIFLEX EK-1652
32 GB DDR4 3200 SODIMM module with CL22 latency and 1.2 V operation for POSIFLEX EK-1652 kiosks
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32GB single module expands POSIFLEX EK-1652 kiosk memory capacity
- DDR4 3200MHz speed matches system specification for stable operation
- CL22 latency with 1.2V voltage ensures efficient power use
- 260-pin SODIMM form factor fits the Mercury Series kiosk slot directly
- Non-ECC unbuffered 2Rx8 design using major OEM chips for reliable performance
POSIFLEX EK-1652 compatible SODIMM
This 32GB DDR4 module is built for the POSIFLEX EK-1652 Mercury Series kiosk. It delivers a straightforward capacity increase for point-of-sale terminals that need more headroom for multitasking. The single-stick design leaves any second slot free for future expansion. System integrators and IT staff can deploy it without guessing compatibility.
260-pin unbuffered non-ECC layout
The stick uses a standard 260-pin DDR4 SODIMM edge connector with 2Rx8 organisation and no heat spreader. That low-profile form factor fits tight kiosk chassis where taller modules would foul the case or airflow. Unbuffered non-ECC signalling matches the platform's memory controller exactly. Installation follows the usual SODIMM procedure with no extra cables or brackets required.
1.2V operation at CL22 3200 speed
Rated at 1.20V, the module runs at DDR4 3200 (PC4-25600) with CAS latency 22. The reduced voltage keeps power draw modest inside a sealed kiosk enclosure. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested under load before shipping. Silent passive cooling means no fan noise is added to the counter environment.
Kohokohdat
- 32GB single module expands POSIFLEX EK-1652 kiosk memory capacity
- DDR4 3200MHz speed matches system specification for stable operation
- CL22 latency with 1.2V voltage ensures efficient power use
- 260-pin SODIMM form factor fits the Mercury Series kiosk slot directly
- Non-ECC unbuffered 2Rx8 design using major OEM chips for reliable performance
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-328K1 |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Kysymyksiä tästä tuotteesta
Does the DDR4 3200 PC4-25600 interface limit real-world bandwidth in the POSIFLEX EK-1652?
The module runs at 3200 MT/s with CL22 timing; actual throughput depends on the kiosk's memory controller and BIOS settings.
What physical slot and form factor does this 260-pin SODIMM require?
It fits a standard DDR4 SO-DIMM socket; the 260-pin edge connector and 1.20 V operation match the EK-1652's memory slot.
What is the correct installation sequence for this 2Rx8 SODIMM, and which step is often missed?
Power off, open the chassis, align the notch, press firmly until the retention clips click, then verify 32 GB appears in BIOS.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 $
0.00134506BTC
Varastossa
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 $
0.00010236BTC
Varastossa