We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, 260-pin SODIMM form factor, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR4 3200 CL22 260-PIN SODIMM memory upgrade for POSIFLEX EK-1652

SKU CH-21E0-KA2ZA

32 GB DDR4 3200 SODIMM module with CL22 latency and 1.2 V operation for POSIFLEX EK-1652 kiosks

  • Capacity32GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB single module expands POSIFLEX EK-1652 kiosk memory capacity
  • DDR4 3200MHz speed matches system specification for stable operation
  • CL22 latency with 1.2V voltage ensures efficient power use
  • 260-pin SODIMM form factor fits the Mercury Series kiosk slot directly
  • Non-ECC unbuffered 2Rx8 design using major OEM chips for reliable performance

POSIFLEX EK-1652 compatible SODIMM

This 32GB DDR4 module is built for the POSIFLEX EK-1652 Mercury Series kiosk. It delivers a straightforward capacity increase for point-of-sale terminals that need more headroom for multitasking. The single-stick design leaves any second slot free for future expansion. System integrators and IT staff can deploy it without guessing compatibility.

260-pin unbuffered non-ECC layout

The stick uses a standard 260-pin DDR4 SODIMM edge connector with 2Rx8 organisation and no heat spreader. That low-profile form factor fits tight kiosk chassis where taller modules would foul the case or airflow. Unbuffered non-ECC signalling matches the platform's memory controller exactly. Installation follows the usual SODIMM procedure with no extra cables or brackets required.

1.2V operation at CL22 3200 speed

Rated at 1.20V, the module runs at DDR4 3200 (PC4-25600) with CAS latency 22. The reduced voltage keeps power draw modest inside a sealed kiosk enclosure. Major OEM DRAM from Samsung, Micron or Hynix is stress-tested under load before shipping. Silent passive cooling means no fan noise is added to the counter environment.

Highlights

  • 32GB single module expands POSIFLEX EK-1652 kiosk memory capacity
  • DDR4 3200MHz speed matches system specification for stable operation
  • CL22 latency with 1.2V voltage ensures efficient power use
  • 260-pin SODIMM form factor fits the Mercury Series kiosk slot directly
  • Non-ECC unbuffered 2Rx8 design using major OEM chips for reliable performance

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K1
Capacity32GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the DDR4 3200 PC4-25600 interface limit real-world bandwidth in the POSIFLEX EK-1652?

The module runs at 3200 MT/s with CL22 timing; actual throughput depends on the kiosk's memory controller and BIOS settings.

What physical slot and form factor does this 260-pin SODIMM require?

It fits a standard DDR4 SO-DIMM socket; the 260-pin edge connector and 1.20 V operation match the EK-1652's memory slot.

What is the correct installation sequence for this 2Rx8 SODIMM, and which step is often missed?

Power off, open the chassis, align the notch, press firmly until the retention clips click, then verify 32 GB appears in BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.