NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
Adds 32 GB of registered DDR4 ECC memory at 3200 MHz CL22 for compatible QNAP servers
This 32GB DDR4 3200 CL22 ECC RDIMM module is built for QNAP NAS devices that require registered memory. It suits administrators expanding capacity in compatible rackmount or tower units where error correction and signal buffering are mandatory.
The DDR4 3200 interface tops out at PC4-25600 bandwidth with CL22 latency, so throughput is fixed by the standard rather than the module. Registered buffering adds one clock cycle of address delay, which the memory controller must support; systems without RDIMM capability will not POST.
The bare green PCB has no heat spreader, so airflow across the DIMM slots is the only cooling path. The 288-pin RDIMM keying prevents insertion into UDIMM slots, and the 2Rx8 organisation fits a single rank-per-channel layout on supported QNAP motherboards.
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Device Memory |
| Model | QNAP NAS Memory |
| Part Number | MR25600-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC RDIMM Registered Server Memory Motherboard Compatible |
This single 32GB DDR4 3200 CL22 ECC RDIMM fills one 288-pin slot and runs at 1.2V; adding smaller sticks would require matching speed, rank and voltage to keep the channel stable.
The module runs at DDR4 3200 (PC4-25600) with CL22 latency, giving the NAS its rated bandwidth while the registered buffer and ECC keep data integrity under sustained workloads.
The 288-pin DDR4 RDIMM form factor only fits DDR4 registered DIMM slots; it cannot be used in DDR5, unbuffered UDIMM or SO-DIMM sockets, so future upgrades must stay within DDR4 RDIMM.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?