NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
Adds 32 GB of registered DDR4 ECC memory at 3200 MHz CL22 for compatible QNAP servers
This 32GB DDR4 3200 CL22 ECC RDIMM module is built for QNAP NAS devices that require registered memory. It suits administrators expanding capacity in compatible rackmount or tower units where error correction and signal buffering are mandatory.
The DDR4 3200 interface tops out at PC4-25600 bandwidth with CL22 latency, so throughput is fixed by the standard rather than the module. Registered buffering adds one clock cycle of address delay, which the memory controller must support; systems without RDIMM capability will not POST.
The bare green PCB has no heat spreader, so airflow across the DIMM slots is the only cooling path. The 288-pin RDIMM keying prevents insertion into UDIMM slots, and the 2Rx8 organisation fits a single rank-per-channel layout on supported QNAP motherboards.
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Device Memory |
| Model | QNAP NAS Memory |
| Part Number | MR25600-328K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC RDIMM Registered Server Memory Motherboard Compatible |
This single 32GB DDR4 3200 CL22 ECC RDIMM fills one 288-pin slot and runs at 1.2V; adding smaller sticks would require matching speed, rank and voltage to keep the channel stable.
The module runs at DDR4 3200 (PC4-25600) with CL22 latency, giving the NAS its rated bandwidth while the registered buffer and ECC keep data integrity under sustained workloads.
The 288-pin DDR4 RDIMM form factor only fits DDR4 registered DIMM slots; it cannot be used in DDR5, unbuffered UDIMM or SO-DIMM sockets, so future upgrades must stay within DDR4 RDIMM.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?