Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 384GB 4X96GB DDR5 4800 CL40 2Rx4 1.1V ECC Registered RDIMM memory upgrade

SKU CH-8TZ3-6D0ZA

384 GB DDR5-4800 registered ECC kit with four 96 GB modules at CL40 and 1.1 V for the Supermicro H13DSH motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth out of the box
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor verified for Supermicro H13DSH compatibility

Exact DDR5 Kit for Supermicro H13DSH

This 384GB kit contains four 96GB DDR5 4800 Registered ECC RDIMMs built to the precise rank voltage and timing the motherboard expects. Each module runs at 1.1V with CL40 latency and a 2Rx4 organisation. The 288-pin form factor matches the board's DIMM slots exactly. The kit is validated for full-capacity recognition at rated speed.

Suited for fully populated H13DSH servers.

The kit targets administrators upgrading a Supermicro H13DSH motherboard that supports 96GB Registered ECC modules in a four-slot configuration. Builders using consumer boards UDIMM slots or systems limited to lower densities should look elsewhere. The Registered design and 2Rx4 rank structure require a server-class memory controller. Always consult the board manual for approved population rules before purchase.

2Rx4 Registered ECC at 1.1V CL40 decides

The single specification that determines fit is the 2Rx4 Registered ECC configuration operating at 1.1V with CL40 timing at DDR5 4800. The motherboard must support this exact rank voltage and latency combination to run all four slots at full capacity. If the platform requires a different rank organisation voltage or timing the modules will not operate as intended.

Kohokohdat

  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth out of the box
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor verified for Supermicro H13DSH compatibility

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 384GB 4x96GB kit or a different capacity for my Supermicro H13DSH?

This kit provides 384GB total across four 96GB modules. Verify your motherboard manual for supported capacities and the required DIMM population order before selecting a different size.

What does the DDR5 4800 speed mean once installed in the server?

The modules run at 4800 MT/s with CL40 latency at 1.1V, delivering the rated PC5-38400 bandwidth when the memory controller operates at its specified frequency.

How does the 288-pin RDIMM interface and registered design affect performance?

The 288-pin RDIMM form factor fits the H13DSH slots. Registered architecture buffers address and command signals, allowing all four slots to be fully populated at 384GB while ECC corrects single-bit errors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.