Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 384GB total

NEMIX RAM

NEMIX RAM 384GB 4x96GB DDR5 4800 CL40 ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-5NV0-6WBT9

384 GB kit of four 96 GB DDR5-4800 CL40 ECC registered RDIMMs at 1.1 V, 2Rx4, verified for Supermicro H14DSH

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Näytä 30 muuta kokoonpanoa
  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 288-pin RDIMM form factor matches Supermicro H14DSH requirements
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR5-4800 ECC RDIMM kit

This 384 GB kit contains four 96 GB DDR5-4800 registered ECC modules built to the 288-pin RDIMM form factor. It is designed for the Supermicro H14DSH motherboard and matches the board's required rank, voltage and timing so the system recognises the full capacity at rated speed.

Capacity and registered headroom

Four dual-rank 2Rx4 modules deliver 384 GB total while the registered architecture offloads the memory controller, allowing every slot to run fully populated at DDR5-4800 CL40 1.10 V. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. The kit stops at the board's maximum supported density and will not scale beyond the four DIMM slots provided.

Lifetime support and fitment guidance

A lifetime replacement warranty and free US-based technical support back the modules. The supplier recommends consulting the system or motherboard manual for approved DIMM population order and installation steps before purchase to ensure correct configuration.

Kohokohdat

  • 384 GB total capacity from four 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 288-pin RDIMM form factor matches Supermicro H14DSH requirements
  • Lifetime replacement warranty with US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 4800 MHz DDR5 RDIMM kit run at its rated speed alongside any existing DDR5 modules I keep in the Supermicro H14DSH?

The kit is an exact-match upgrade specced to the board's memory controller at 4800 MT/s, CL40, 1.1 V and 2Rx4 rank; mixing modules with different timings, ranks or voltages can force the controller to down-clock all slots, so population rules in the H14DSH manual should be followed for full-speed operation.

How can I confirm the 384 GB kit is recognised and running at DDR5-4800 CL40 after installation?

Enter the BIOS or UEFI on the H14DSH and verify the memory information screen shows 384 GB total, DDR5-4800 (PC5-38400) data rate, CL40 latency, 1.1 V and registered ECC status for all four slots.

What comes in the box and do I need any extra brackets, cables or cooling for this RDIMM kit?

The package contains only the four 96 GB 288-pin DDR5 RDIMM modules; no heat spreaders, brackets, cables or additional cooling are included or required for standard server chassis airflow.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.