Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM sticks, no heat spreaders, 288-pin gold contacts, matte black PCB

NEMIX RAM

NEMIX RAM 384GB 4x96GB DDR5 6400 CL52 1.1V 2Rx4 ECC RDIMM X14SRA-F memory upgrade

SKU CH-3FGH-CG97F

384 GB DDR5 ECC registered RDIMM kit (4 × 96 GB, 6400 MT/s, CL52, 1.1 V, 2Rx4) validated for Supermicro X14SRA-F motherboards

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Näytä 4 muuta kokoonpanoa
  • 384 GB total capacity from four 96 GB modules for maximum memory density
  • DDR5 6400 speed with CL52 latency at 1.1 V for efficient high-throughput operation
  • Registered ECC RDIMM architecture corrects single-bit errors and buffers signals for full-slot stability
  • 288-pin 2Rx4 form factor matches Supermicro X14SRA-F memory population rules exactly
  • Lifetime replacement coverage with US-based technical support for long-term deployment confidence

Exact-match 384 GB DDR5 kit for Supermicro X14SRA-F

This NEMIX RAM kit delivers 384 GB across four 96 GB DDR5-6400 RDIMMs, each running at 1.1 V with CL52 timings. The modules are registered ECC 2Rx4 288-pin DIMMs built to the precise rank, voltage and timing the motherboard's memory controller expects. They are recognised at full capacity and operate at rated speed immediately.

DDR5-6400 registered ECC limits and population rules

Registered architecture buffers the address and command bus so every slot can run fully populated without overloading the controller, while ECC corrects single-bit errors on the fly. The board only accepts 288-pin RDIMMs — not UDIMMs or SODIMMs — and its manual defines the supported capacities and required population order. Exceeding those limits or installing in the wrong sequence will prevent the system from posting.

Replaces partial or mismatched memory configurations

Upgrading from a smaller matched kit or from mixed-capacity modules removes the bottlenecks of uneven channel loading and restores full ECC protection across all ranks. The jump is worth it when workloads demand the full 384 GB at native DDR5-6400 throughput and the platform's qualified-vendor list includes this exact part number. Builders needing a different capacity, voltage or form factor must select a kit validated for those parameters.

Kohokohdat

  • 384 GB total capacity from four 96 GB modules for maximum memory density
  • DDR5 6400 speed with CL52 latency at 1.1 V for efficient high-throughput operation
  • Registered ECC RDIMM architecture corrects single-bit errors and buffers signals for full-slot stability
  • 288-pin 2Rx4 form factor matches Supermicro X14SRA-F memory population rules exactly
  • Lifetime replacement coverage with US-based technical support for long-term deployment confidence

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 4x96GB kit or a smaller kit for my Supermicro X14SRA-F?

The 4x96GB kit fills all four slots to reach the 384GB total. Choose it only if your workload needs that capacity and your CPU supports four dual-rank DIMMs per channel; otherwise a smaller kit leaves room for future expansion.

What does the DDR5 6400 CL52 rating deliver in a live server?

The modules run at 6400 MT/s with a CAS latency of 52 cycles at 1.1 V. Registered buffering and ECC keep every slot stable at full population, so throughput matches the rated speed without down-clocking.

How does the 288-pin RDIMM interface limit speed or capacity on the X14SRA-F?

The 288-pin Registered DDR5 form factor is the only type the X14SRA-F accepts. It enables the board's maximum supported capacity and locks the kit to its 6400 MT/s rating; UDIMM or SODIMM modules will not fit or function.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.