Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 1.1V, CL52, 6400MHz, 96GB each, 384GB kit

NEMIX RAM

NEMIX RAM DDR5 6400 384GB (4x96GB) ECC RDIMM CL52 1.1V Supermicro X14SDW-64C-SP9F memory upgrade

SKU CH-YC79-XNJ0R

384 GB DDR5 ECC registered kit of four 96 GB RDIMMs at 6400 MT/s, CL52, 1.1 V for Supermicro X14SDW-64C-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Näytä 4 muuta kokoonpanoa
  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency at 1.10 V for efficient high-throughput workloads
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors on the fly
  • 288-pin 2Rx4 form factor matches the Supermicro X14SDW-64C-SP9F motherboard requirements exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Exact-match upgrade kit

This 384GB kit contains four 96GB DDR5 6400 RDIMM modules built to the Supermicro X14SDW-64C-SP9F memory-population rules. Each module is a 2Rx4 registered ECC DIMM running at 1.1V with CL52 timing. The 288-pin form factor matches the board's DDR5 slots exactly.

Who this suits and who it does not

Server builders populating all four channels of an X14SDW-64C-SP9F with the maximum validated capacity will use this kit. Buyers who need a different capacity, speed, rank configuration or unbuffered UDIMM modules cannot use this kit. Systems that require SODIMM or a non-ECC memory type are also incompatible.

Deciding specification

The motherboard requires registered DDR5 RDIMMs at 6400 MT/s with 2Rx4 organisation and 1.1V operation; this kit matches that exact combination. If your platform demands a different speed, voltage, rank or form factor, the modules will not be recognised or will not run at rated performance.

Kohokohdat

  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency at 1.10 V for efficient high-throughput workloads
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors on the fly
  • 288-pin 2Rx4 form factor matches the Supermicro X14SDW-64C-SP9F motherboard requirements exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 384GB kit work in my Supermicro X14SDW-64C-SP9F without adding other modules?

Yes, the kit provides four 96GB DDR5 6400 RDIMMs that match the board's required 288-pin registered ECC form factor, 1.1V voltage, and CL52 timing for full-capacity recognition.

Can I keep my existing DDR5 RDIMMs and add this 4x96GB kit to the same server?

Only if the current modules are also DDR5 6400 registered ECC 2Rx4 at 1.1V with identical CL52 timing; otherwise the memory controller will downclock or reject the mixed population.

How do I confirm the server sees all 384GB at the rated 6400 MT/s after installation?

Enter the BIOS or use a tool like dmidecode to verify each slot shows 96GB, speed reads 6400 MT/s (PC5-51200), and ECC registered mode is active.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.