저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 1.1V, CL52, 6400MHz, 96GB each, 384GB kit

NEMIX RAM

NEMIX RAM DDR5 6400 384GB (4x96GB) ECC RDIMM CL52 1.1V Supermicro X14SDW-64C-SP9F memory upgrade

SKU CH-YC79-XNJ0R

384 GB DDR5 ECC registered kit of four 96 GB RDIMMs at 6400 MT/s, CL52, 1.1 V for Supermicro X14SDW-64C-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

구성 4개 더 보기
  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency at 1.10 V for efficient high-throughput workloads
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors on the fly
  • 288-pin 2Rx4 form factor matches the Supermicro X14SDW-64C-SP9F motherboard requirements exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Exact-match upgrade kit

This 384GB kit contains four 96GB DDR5 6400 RDIMM modules built to the Supermicro X14SDW-64C-SP9F memory-population rules. Each module is a 2Rx4 registered ECC DIMM running at 1.1V with CL52 timing. The 288-pin form factor matches the board's DDR5 slots exactly.

Who this suits and who it does not

Server builders populating all four channels of an X14SDW-64C-SP9F with the maximum validated capacity will use this kit. Buyers who need a different capacity, speed, rank configuration or unbuffered UDIMM modules cannot use this kit. Systems that require SODIMM or a non-ECC memory type are also incompatible.

Deciding specification

The motherboard requires registered DDR5 RDIMMs at 6400 MT/s with 2Rx4 organisation and 1.1V operation; this kit matches that exact combination. If your platform demands a different speed, voltage, rank or form factor, the modules will not be recognised or will not run at rated performance.

주요 특징

  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency at 1.10 V for efficient high-throughput workloads
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors on the fly
  • 288-pin 2Rx4 form factor matches the Supermicro X14SDW-64C-SP9F motherboard requirements exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will this 384GB kit work in my Supermicro X14SDW-64C-SP9F without adding other modules?

Yes, the kit provides four 96GB DDR5 6400 RDIMMs that match the board's required 288-pin registered ECC form factor, 1.1V voltage, and CL52 timing for full-capacity recognition.

Can I keep my existing DDR5 RDIMMs and add this 4x96GB kit to the same server?

Only if the current modules are also DDR5 6400 registered ECC 2Rx4 at 1.1V with identical CL52 timing; otherwise the memory controller will downclock or reject the mixed population.

How do I confirm the server sees all 384GB at the rated 6400 MT/s after installation?

Enter the BIOS or use a tool like dmidecode to verify each slot shows 96GB, speed reads 6400 MT/s (PC5-51200), and ECC registered mode is active.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.