Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 384GB (6x64GB) DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-EQ1P-DCNHQ

A 384GB DDR5-4800 ECC registered RDIMM kit built with six 64GB dual-rank modules at 1.1V CL40 for Supermicro H13SVW-N motherboards

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Speed 4800MHz

  • 384 GB total capacity from six 64 GB modules
  • DDR5 4800 MT/s speed with CL40 latency
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches Supermicro H13SVW-N requirements
  • 288-pin RDIMM form factor fits the motherboard slots exactly

384GB DDR5-4800 ECC RDIMM kit for Supermicro

This 384GB kit contains six 64GB DDR5 Registered DIMMs built for the Supermicro H13SVW-N motherboard. Each module runs at 4800 MT/s with CL40 latency at 1.1V. The 2Rx4 organisation and registered buffer let the memory controller address every slot at full capacity. It targets administrators who need maximum registered ECC capacity on this specific platform.

DDR5-4800 registered ECC limits for dense population

DDR5-4800 is the baseline JEDEC speed for this generation; the memory controller will not negotiate a higher data rate with these modules. Registered buffering reduces electrical load so all channels stay stable when fully populated, while on-die ECC corrects single-bit errors without host intervention. The 288-pin RDIMM form factor fits only boards wired for registered DDR5; it will not seat in UDIMM or SODIMM slots.

Upgrading from smaller registered ECC kits

The kit replaces any smaller DDR5 RDIMM set that leaves DIMM slots empty on the H13SVW-N, raising total capacity to the board's supported maximum. The jump is worthwhile when workloads such as virtualisation, in-memory databases or large dataset processing hit the previous capacity ceiling and the board's population rules allow all six slots to be filled with 2Rx4 modules.

Kohokohdat

  • 384 GB total capacity from six 64 GB modules
  • DDR5 4800 MT/s speed with CL40 latency
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches Supermicro H13SVW-N requirements
  • 288-pin RDIMM form factor fits the motherboard slots exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 384GB kit with six 64GB modules or a different capacity for my Supermicro H13SVW-N?

The kit provides 384GB total across six 64GB RDIMMs, matching the board's DDR5-4800 registered ECC requirements and 2Rx4 rank layout for full-speed operation when all slots are populated.

What does the DDR5-4800 CL40 rating deliver once the modules are installed in the server?

The memory runs at 4800 MT/s with a CAS latency of 40 cycles at 1.10V, giving the bandwidth and timing the H13SVW-N memory controller expects for stable, error-corrected throughput.

How does the 288-pin RDIMM interface and registered ECC design affect real-world limits?

The registered buffer reduces electrical load on the controller so all six slots can run at the rated 4800 MT/s, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.