Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules in static bags, 288-pin gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 256GB (2x128GB) CL40 2Rx4 ECC RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-YEEC-BTADP

256 GB (2 × 128 GB) DDR5-4800 ECC registered RDIMM kit, CL40 at 1.1 V, validated for the Supermicro H13SVW-N motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Näytä 12 muuta kokoonpanoa

Speed 4800MHz

  • 256 GB total capacity from two 128 GB modules for maximum server memory density
  • DDR5 4800 speed rated at PC5-38400 for high-throughput workloads
  • Registered ECC architecture with 2Rx4 rank corrects single-bit errors and offloads the memory controller
  • CL40 latency at 1.10 V delivers efficient operation within spec
  • 288-pin RDIMM form factor verified for Supermicro H13SVW-N motherboard compatibility

256GB DDR5-4800 ECC RDIMM kit for Supermicro

This 256GB kit contains two 128GB DDR5-4800 registered ECC modules built to the PC5-38400 standard with CL40 timing and 1.10V operation. The 2Rx4 288-pin RDIMM form factor matches the exact rank, voltage and timing the H13SVW-N memory controller expects for full-capacity recognition at rated speed. It is intended for administrators expanding a Supermicro H13SVW-N server with enterprise-grade stability.

Verify motherboard population rules

Before ordering, consult the Supermicro H13SVW-N manual for approved DIMM population order, maximum supported capacity per slot and any BIOS version requirements. The board requires registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Confirm the server's memory-configuration limits to ensure the 2x128GB arrangement is valid for your specific chassis and processor configuration.

Lifetime replacement warranty

The kit ships with a lifetime replacement warranty and access to free US-based technical support for installation and troubleshooting assistance. No heat spreaders are included on the modules, so airflow in the server chassis must be adequate for bare DRAM operation. The registered architecture offloads the memory controller to maintain stability when all slots are fully populated.

Kohokohdat

  • 256 GB total capacity from two 128 GB modules for maximum server memory density
  • DDR5 4800 speed rated at PC5-38400 for high-throughput workloads
  • Registered ECC architecture with 2Rx4 rank corrects single-bit errors and offloads the memory controller
  • CL40 latency at 1.10 V delivers efficient operation within spec
  • 288-pin RDIMM form factor verified for Supermicro H13SVW-N motherboard compatibility

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 256GB kit arrive as two 128GB modules or must I buy them separately?

The kit contains two 128GB DDR5 RDIMMs; nothing else is required to reach 256GB.

Should I choose the CL40 2Rx4 version or a different latency and rank for the H13SVW-N?

The board expects DDR5-4800 2Rx4 registered ECC at 1.1V CL40; this exact specification matches the motherboard's qualified configuration.

What does the PC5-38400 rating mean when the memory is installed in the server?

It indicates a peak transfer rate of 38400 MT/s at DDR5-4800, which the memory controller will use when all slots are populated with these registered ECC modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.