NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
Eight 48 GB DDR5 modules deliver 384 GB of registered ECC server memory at 5600 MHz with CL46 latency and 1.1 V operation
This 384GB kit contains eight 48GB DDR5 5600MHz registered DIMMs with ECC. It is built for servers that require registered memory and cannot be used in standard desktop PCs. The modules operate at 1.1V with a CAS latency of 46.
Registered DDR5 modules run at 1.1V, helping to limit power draw in densely populated server slots. The 2Rx8 organisation spreads load across ranks, supporting stable thermals under sustained workloads. No active cooling is included, so airflow must come from the chassis.
The 288-pin RDIMM form factor fits server boards wired for DDR5 5600 registered memory. Eight modules fill eight slots, leaving no free DIMM positions on typical dual-socket boards. Buyers needing non-ECC or unbuffered memory should look elsewhere.
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MR44800-4828K8-SM-SYS-621P-TR |
| Part Number | Part#: MR44800-4828K8-SM-SYS-621P-TR |
| Capacity | 384GB (8 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Align the off-centre key notch on each 288-pin module with the slot, press straight down until both retention clips click, then verify in BIOS that all eight 48 GB sticks are detected at 5600 MHz.
The modules have no moving parts and run at 1.1 V, so no scheduled maintenance is required; a stick is only replaced if memory diagnostics report uncorrectable ECC errors.
The CAS latency of 46 cycles at 5600 MHz sets the timing floor, so latency-sensitive throughput plateaus before thermal or voltage headroom is reached.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?