We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 384GB (8 x 48GB) DDR5 5600MHz ECC RDIMM Server RAM

SKU CH-CSY6-3KCFY

Eight 48 GB DDR5 modules deliver 384 GB of registered ECC server memory at 5600 MHz with CL46 latency and 1.1 V operation

  • Capacity384GB (8 x 48GB)
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 384 GB total capacity from eight 48 GB modules for large server workloads
  • DDR5 5600 MHz speed rated at PC5-44800 for high bandwidth
  • ECC registered design detects and corrects memory errors automatically
  • Low 1.1 V operation reduces power draw in dense configurations
  • Built with major OEM Samsung, Micron or Hynix chips for consistent quality

384GB DDR5 ECC RDIMM Kit

This 384GB kit contains eight 48GB DDR5 5600MHz registered DIMMs with ECC. It is built for servers that require registered memory and cannot be used in standard desktop PCs. The modules operate at 1.1V with a CAS latency of 46.

Thermals Noise Power

Registered DDR5 modules run at 1.1V, helping to limit power draw in densely populated server slots. The 2Rx8 organisation spreads load across ranks, supporting stable thermals under sustained workloads. No active cooling is included, so airflow must come from the chassis.

Build Fit Requirements

The 288-pin RDIMM form factor fits server boards wired for DDR5 5600 registered memory. Eight modules fill eight slots, leaving no free DIMM positions on typical dual-socket boards. Buyers needing non-ECC or unbuffered memory should look elsewhere.

Highlights

  • 384 GB total capacity from eight 48 GB modules for large server workloads
  • DDR5 5600 MHz speed rated at PC5-44800 for high bandwidth
  • ECC registered design detects and corrects memory errors automatically
  • Low 1.1 V operation reduces power draw in dense configurations
  • Built with major OEM Samsung, Micron or Hynix chips for consistent quality

Specifications

BrandNEMIX RAM
ModelPart#: MR44800-4828K8-SM-SYS-621P-TR
Part NumberPart#: MR44800-4828K8-SM-SYS-621P-TR
Capacity384GB (8 x 48GB)
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Questions about this item

How do I install these 288-pin DDR5 RDIMMs and which step is most often missed?

Align the off-centre key notch on each 288-pin module with the slot, press straight down until both retention clips click, then verify in BIOS that all eight 48 GB sticks are detected at 5600 MHz.

What maintenance or replacement will this 384 GB kit need over time?

The modules have no moving parts and run at 1.1 V, so no scheduled maintenance is required; a stick is only replaced if memory diagnostics report uncorrectable ECC errors.

What limit appears first when this registered ECC memory runs sustained workloads?

The CAS latency of 46 cycles at 5600 MHz sets the timing floor, so latency-sensitive throughput plateaus before thermal or voltage headroom is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.