Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 576GB 6x96GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM Supermicro H14DSG-O-CPU memory upgrade

SKU CH-KBE3-H98HP

A 576GB DDR5 4800 CL40 ECC RDIMM kit of six 96GB 2Rx4 modules at 1.1V for the Supermicro H14DSG-O-CPU motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Näytä 30 muuta kokoonpanoa
  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • 1 V registered ECC RDIMM design offloads the memory controller for stable full-population operation
  • 2Rx4 rank organisation and 288-pin form factor align with Supermicro H14DSG-O-CPU population rules
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade reliability

Server memory kit for Supermicro H14DSG-O-CPU

This 576GB kit contains six 96GB DDR5 RDIMM modules rated at 4800 MT/s with CL40 latency and 1.1V operation. It is built for the Supermicro H14DSG-O-CPU motherboard where registered ECC memory is required for full capacity and stability. The modules use a 2Rx4 rank structure that matches the board's memory controller expectations.

Replaces partial or slower memory configurations

Upgrading from a smaller kit or mixed-capacity DIMMs lets the server address the full 576GB at the rated 4800 speed without downclocking. The jump is worth it when your workloads need maximum registered ECC capacity and the motherboard's population rules allow all six slots to be filled with 2Rx4 modules at 1.1V.

Check your motherboard manual before ordering

Verify the approved DIMM population order for six 96GB 2Rx4 RDIMMs on the H14DSG-O-CPU and confirm the BIOS version supports this capacity per socket. Ensure the system requires 288-pin DDR5 RDIMMs and not UDIMM or SODIMM form factors.

Kohokohdat

  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • 1 V registered ECC RDIMM design offloads the memory controller for stable full-population operation
  • 2Rx4 rank organisation and 288-pin form factor align with Supermicro H14DSG-O-CPU population rules
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade reliability

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What slot type and pin count does the Supermicro H14DSG-O-CPU motherboard require for this 576GB DDR5 kit?

The motherboard uses 288-pin DDR5 RDIMM slots; each of the six 96GB modules in this kit matches that exact form factor.

In what order should the six 96GB RDIMMs be populated to follow the board's memory-population rules?

Consult the Supermicro H14DSG-O-CPU manual for the approved DIMM population sequence; the board's memory controller expects a specific slot order when all six channels are filled.

How does the registered ECC design affect long-term reliability compared with unbuffered memory?

Registered architecture reduces electrical load on the memory controller, allowing all six slots to run fully populated at 4800 MT/s, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.