Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5 4800 CL40 2Rx4 ECC Registered RDIMM Supermicro H13SSH memory upgrade

SKU CH-YNSH-FQHJK

Six 96 GB DDR5-4800 registered ECC RDIMMs deliver 576 GB at 1.1 V CL40 for Supermicro H13SSH servers

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 576 GB total capacity across six 96 GB modules for maximum server density
  • DDR5 4800 speed with CL40 timing and 1.1 V operation for rated performance
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors under full load
  • 288-pin RDIMM form factor verified for Supermicro H13SSH motherboard fitment
  • Lifetime replacement warranty with US-based technical support included

576GB DDR5 4800 Registered ECC Kit

This 576GB kit contains six 96GB DDR5 4800 Registered ECC RDIMM modules built for the Supermicro H13SSH motherboard. Each module runs at 1.10V with CL40 latency and a 2Rx4 organisation. The 288-pin form factor matches the board's memory slots exactly. It is designed for servers that require maximum registered capacity in every channel.

Registered ECC Architecture

Registered buffering offloads the memory controller so all six slots can run fully populated at the rated 4800 MT/s without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. This combination is the single specification that determines whether the kit will operate at full capacity and rated speed on the target platform.

Sustained Load Behaviour

Under continuous heavy workloads the registered design maintains stable signalling across all populated channels, allowing the memory controller to sustain throughput without throttling. ECC correction operates transparently during extended operation, keeping error rates at zero while the modules run at the specified 1.10V. The result is consistent bandwidth and reliability for long-running server tasks.

Kohokohdat

  • 576 GB total capacity across six 96 GB modules for maximum server density
  • DDR5 4800 speed with CL40 timing and 1.1 V operation for rated performance
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors under full load
  • 288-pin RDIMM form factor verified for Supermicro H13SSH motherboard fitment
  • Lifetime replacement warranty with US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much total memory will the server see once all six 96 GB modules are installed?

The kit provides 576 GB of DDR5 capacity, and the Supermicro H13SSH will recognise the full amount when populated according to the board's memory rules.

What does the PC5-38400 rating mean for real-world throughput on this motherboard?

PC5-38400 identifies the DDR5 4800 data rate; the registered ECC modules run at that speed on the H13SSH when the memory controller is configured for the rated frequency.

Will these 288-pin RDIMMs fit the memory slots on a Supermicro H13SSH?

Yes, the 288-pin registered DIMM form factor matches the slots on the H13SSH; the kit is spec-matched to that board's population requirements.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.