Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in static bags, 288‑pin, no heat spreaders

NEMIX RAM

NEMIX RAM 576GB 6x96GB DDR5 4800 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-NCPD-6CPVC

Six 96 GB DDR5 registered ECC modules at 4800 MT/s with CL40 timing and 1.1 V operation, totalling 576 GB for the Supermicro H14DSG-OM motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Näytä 30 muuta kokoonpanoa
  • 576 GB total capacity from six 96 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth at 1.1 V
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H14DSG-OM slot requirements
  • Lifetime replacement warranty with US-based technical support included

Exact-match 576GB DDR5 kit for Supermicro H14DSG-OM

This NEMIX RAM kit delivers 576GB of DDR5 4800 memory in six 96GB RDIMM modules. It is built for the Supermicro H14DSG-OM motherboard and targets administrators who need maximum registered ECC capacity in a single validated package.

Registered ECC architecture for full-slot population

The 288-pin RDIMM form factor and registered design let the memory controller drive all populated slots at rated speed. ECC corrects single-bit errors on the fly while the 1.1V operating voltage matches the platform's native DDR5 power envelope.

Six-module kit pre-configured for the board

The package contains exactly six matched 96GB modules, eliminating manual matching and population-order guesswork. Each stick carries the specified CL40 timing and 2Rx4 rank structure so the server recognises the full 576GB at POST without further tuning.

Kohokohdat

  • 576 GB total capacity from six 96 GB modules for maximum memory density
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth at 1.1 V
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H14DSG-OM slot requirements
  • Lifetime replacement warranty with US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 1.1 V operating voltage stay stable when all six 96 GB modules run continuously?

The kit is rated at 1.10 V and uses registered ECC RDIMM architecture, which buffers the memory controller so every slot can stay fully populated at the rated voltage under sustained load.

How much heat or fan noise do the six 96 GB sticks add during all-day operation?

These modules have no heat spreader and run at the standard 1.10 V DDR5 voltage; registered buffering reduces electrical load on the motherboard, so thermal output and any resulting fan activity remain minimal.

What motherboard slot layout and population rules must my Supermicro H14DSG-OM already have for this 6×96 GB kit to work?

The board needs six free 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules at 4800 MT/s; consult the motherboard manual for the exact DIMM population order before installing the full 576 GB kit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.