Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 288-pin DDR4 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 2933MHz ECC RDIMM CL21 2Rx4 1.2V 288-pin memory upgrade

SKU CH-F6EW-RWHPR

A 64 GB DDR4 2933 MHz ECC registered server memory kit in two 32 GB modules with CL21 latency, 1.2 V operation and 288-pin RDIMM form factor

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 64GB 2X32GB

  • 64 GB total capacity for large server workloads
  • DDR4 2933 MHz speed with CL21 latency for responsive data access
  • ECC registered design detects and corrects memory errors automatically
  • Dual-rank 2Rx4 organisation maximises density per DIMM slot
  • 2 V operation reduces power draw in dense configurations

ASRock Rack ROMED8-2T compatible DDR4 ECC RDIMM kit

This 64GB kit contains two 32GB registered DDR4 modules built for the ASRock Rack ROMED8-2T motherboard. ECC and registered operation protect data integrity in server and workstation workloads. The modules run at 2933MHz with CL21 latency at 1.2V. No heat spreaders are fitted.

Sustained load stability on EPYC platforms

All modules are stress tested under load to verify reliability during continuous operation. Registered buffering reduces electrical load on the memory controller, helping maintain consistent throughput in multi-threaded server tasks. ECC corrects single-bit errors without halting the system. The 2Rx4 organisation supports high-density population on compatible boards.

2Rx4 rank density decides slot population

Each 32GB module uses a 2Rx4 configuration, which determines how many kits can be installed per channel on the target motherboard. Builders needing different rank density or non-ECC unbuffered memory cannot use this kit. Verify the platform's qualified vendor list for maximum supported capacity per slot.

Kohokohdat

  • 64 GB total capacity for large server workloads
  • DDR4 2933 MHz speed with CL21 latency for responsive data access
  • ECC registered design detects and corrects memory errors automatically
  • Dual-rank 2Rx4 organisation maximises density per DIMM slot
  • 2 V operation reduces power draw in dense configurations

Tekniset tiedot

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-324K2
Capacity64GB (2 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (2X32GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power does the 1.2V DDR4 2933MHz ECC RDIMM kit draw under continuous load?

Each module operates at 1.2V; total draw depends on the server platform and workload, but registered ECC DDR4 at this voltage is designed for efficient 24/7 operation in EPYC systems.

What motherboard slot and chipset support are required to run this 2Rx4 registered kit?

You need a motherboard with 288-pin DDR4 RDIMM slots that supports registered ECC memory, such as the ASRock Rack ROMED8-2T for AMD EPYC processors.

Will this CL21 2Rx4 registered kit work alongside older single-rank DDR4 ECC modules?

Mixing ranks and latencies is not recommended; the 2Rx4 organisation and CL21 timing should be matched across all populated channels for stable operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.