Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 ECC Registered RDIMM CL40 1.1V 2Rx8 288-pin Supermicro H13DSH memory upgrade

SKU CH-ZFKZ-4WNW2

Dual-rank 64 GB DDR5 ECC RDIMM kit runs at 4800 MT/s with CL40 latency and 1.1 V operation for Supermicro H13DSH servers

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from two 32 GB modules
  • DDR5-4800 speed with CL40 latency for rated performance
  • ECC registered design corrects single-bit errors automatically
  • 1 V operation matches server memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro H13DSH motherboard

Exact-match DDR5-4800 kit for Supermicro H13DSH

This 64 GB kit delivers two 32 GB registered ECC DDR5 RDIMMs built to the 288-pin DDR5-4800 (PC5-38400) standard at 1.1 V and CL40. It targets administrators upgrading a Supermicro H13DSH motherboard that requires registered memory with ECC.

Registered ECC RDIMM form factor

The single specification that determines fit is the registered ECC RDIMM design; the motherboard's memory controller expects buffered modules with on-die error correction and will not accept unbuffered UDIMMs or SODIMMs.

Dual-rank 2Rx8 organisation at full speed

Each module uses a 2Rx8 layout so the controller can address the full 64 GB across both slots at the rated 4800 MT/s. Capacity heads up at 64 GB; larger configurations would require additional DIMM slots and motherboard support not covered by this kit.

Kohokohdat

  • 64 GB total capacity from two 32 GB modules
  • DDR5-4800 speed with CL40 latency for rated performance
  • ECC registered design corrects single-bit errors automatically
  • 1 V operation matches server memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro H13DSH motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the DDR5-4800 speed run at its rated 4800 MHz once installed in a Supermicro H13DSH?

Yes, the kit is spec-matched to the H13DSH memory controller so it is recognised at full capacity and operates at its rated DDR5-4800 speed without manual tuning.

What does the registered ECC RDIMM interface do for a fully populated server?

Registered buffering offloads the memory controller, allowing every slot to run fully populated at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

What physical slot and form factor does this 288-pin kit require on the motherboard?

It requires standard 288-pin DDR5 RDIMM slots; the modules have no heat spreader and fit the H13DSH's registered DIMM sockets directly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.