Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 UDIMM modules with black chips and gold contacts no heat spreader

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600MHz ECC UDIMM CL46 1.1V Supermicro X14SAZ-F memory upgrade

SKU CH-QDVT-6J4SS

A 64 GB kit of four 16 GB DDR5 ECC UDIMMs running at 5600 MHz CL46 and 1.1 V, validated for the Supermicro X14SAZ-F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

  • 64 GB capacity from four 16 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC protection corrects single-bit errors to prevent data corruption
  • 1 V operation and CL46 latency match the motherboard memory controller
  • 288-pin unbuffered UDIMM form factor fits Supermicro X14SAZ-F exactly

Supermicro X14SAZ-F upgrade kit

This 64 GB kit contains four 16 GB DDR5 ECC unbuffered UDIMMs built to the exact rank, voltage and timing the Supermicro X14SAZ-F memory controller expects. It is intended for administrators and workstation users who need verified, full-capacity operation on that specific board.

DDR5 5600 practical limits

The modules run at DDR5 5600 (PC5 44800) with CL46 latency at 1.1 V, the standard JEDEC speed grade for this platform. Bandwidth and latency are fixed by that specification; the kit does not support overclocked profiles or lower-latency operation beyond the rated values.

Build and daily implications

Each UDIMM uses a 288-pin unbuffered ECC design without a heat spreader, relying on chassis airflow for cooling. The 1Rx8 organisation keeps electrical loading light, but the four-module population fills every slot on many X14SAZ-F configurations, leaving no room for later capacity expansion. Buyers who want more storage or additional memory channels should verify the board’s maximum supported DIMM count before committing.

Kohokohdat

  • 64 GB capacity from four 16 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC protection corrects single-bit errors to prevent data corruption
  • 1 V operation and CL46 latency match the motherboard memory controller
  • 288-pin unbuffered UDIMM form factor fits Supermicro X14SAZ-F exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 4 x 16 GB kit or a different capacity for the Supermicro X14SAZ-F?

The kit provides 64 GB total across four 16 GB UDIMMs, matching the board's DDR5-5600 ECC unbuffered requirement and populating four slots in a supported configuration.

What does DDR5-5600 (PC5-44800) deliver once installed in the X14SAZ-F?

The modules run at 5600 MT/s with CL46 latency at 1.1 V, giving the memory controller the exact speed and timing it expects for full-capacity operation.

Does the 288-pin ECC UDIMM interface limit bandwidth or capacity on this motherboard?

The 288-pin unbuffered ECC form factor is what the X14SAZ-F requires; it carries the DDR5-5600 signal without registration, so the board's memory controller sets the practical ceiling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.