暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 UDIMM modules with black chips and gold contacts no heat spreader

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600MHz ECC UDIMM CL46 1.1V Supermicro X14SAZ-F memory upgrade

SKU CH-QDVT-6J4SS

A 64 GB kit of four 16 GB DDR5 ECC UDIMMs running at 5600 MHz CL46 and 1.1 V, validated for the Supermicro X14SAZ-F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

  • 64 GB capacity from four 16 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC protection corrects single-bit errors to prevent data corruption
  • 1 V operation and CL46 latency match the motherboard memory controller
  • 288-pin unbuffered UDIMM form factor fits Supermicro X14SAZ-F exactly

Supermicro X14SAZ-F upgrade kit

This 64 GB kit contains four 16 GB DDR5 ECC unbuffered UDIMMs built to the exact rank, voltage and timing the Supermicro X14SAZ-F memory controller expects. It is intended for administrators and workstation users who need verified, full-capacity operation on that specific board.

DDR5 5600 practical limits

The modules run at DDR5 5600 (PC5 44800) with CL46 latency at 1.1 V, the standard JEDEC speed grade for this platform. Bandwidth and latency are fixed by that specification; the kit does not support overclocked profiles or lower-latency operation beyond the rated values.

Build and daily implications

Each UDIMM uses a 288-pin unbuffered ECC design without a heat spreader, relying on chassis airflow for cooling. The 1Rx8 organisation keeps electrical loading light, but the four-module population fills every slot on many X14SAZ-F configurations, leaving no room for later capacity expansion. Buyers who want more storage or additional memory channels should verify the board’s maximum supported DIMM count before committing.

特長

  • 64 GB capacity from four 16 GB modules for high-density workloads
  • DDR5 5600 speed rated at PC5-44800 for fast data throughput
  • ECC protection corrects single-bit errors to prevent data corruption
  • 1 V operation and CL46 latency match the motherboard memory controller
  • 288-pin unbuffered UDIMM form factor fits Supermicro X14SAZ-F exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 4 x 16 GB kit or a different capacity for the Supermicro X14SAZ-F?

The kit provides 64 GB total across four 16 GB UDIMMs, matching the board's DDR5-5600 ECC unbuffered requirement and populating four slots in a supported configuration.

What does DDR5-5600 (PC5-44800) deliver once installed in the X14SAZ-F?

The modules run at 5600 MT/s with CL46 latency at 1.1 V, giving the memory controller the exact speed and timing it expects for full-capacity operation.

Does the 288-pin ECC UDIMM interface limit bandwidth or capacity on this motherboard?

The 288-pin unbuffered ECC form factor is what the X14SAZ-F requires; it carries the DDR5-5600 signal without registration, so the board's memory controller sets the practical ceiling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。