Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black chips, 260-pin SODIMM form factor, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2666 CL19 2Rx8 SODIMM SuperMicro memory upgrade

SKU CH-BWMT-TC6S0

8GB DDR4 2666 CL19 2Rx8 SODIMM module compatible with SuperMicro systems

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands system memory for heavier workloads
  • DDR4 2666 speed delivers high bandwidth for responsive computing
  • CL19 latency supports quick data access in demanding tasks
  • 2 V operation reduces power draw and heat output
  • 260-pin SODIMM form factor fits compatible Supermicro workstations

8GB DDR4 2666 SODIMM for SuperMicro

This 8 GB DDR4 2666 module is built for SuperMicro workstations and servers that accept unbuffered non-ECC SODIMMs. It targets administrators and integrators who need a direct replacement for the MEM-DR480L-IL02-SO26 part without changing platform firmware.

Tool-free slot insertion with 260-pin keying

The stick drops into a standard 260-pin SODIMM slot and locks with the side clips; no screws or cables are required. Because it is unbuffered and non-ECC, it will not function in systems that demand registered or error-correcting modules, so verify the platform requirement before ordering.

Single-rank alternative would add headroom

The 2Rx8 organisation delivers 8 GB at CL19 1.20 V, suitable for typical multi-threaded workloads and virtualization hosts. Capacity tops out at one module per slot; configurations needing more than 8 GB per channel must populate additional sockets or select higher-density parts.

Kohokohdat

  • 8 GB capacity expands system memory for heavier workloads
  • DDR4 2666 speed delivers high bandwidth for responsive computing
  • CL19 latency supports quick data access in demanding tasks
  • 2 V operation reduces power draw and heat output
  • 260-pin SODIMM form factor fits compatible Supermicro workstations

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Kysymyksiä tästä tuotteesta

How can I verify the module is running at DDR4 2666 CL19 after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should report 2666 MT/s speed, CL19 latency, 1.20 V voltage and 2Rx8 organisation for the installed SODIMM.

What is included in the package and do I need any extra parts?

The box contains one 8 GB 260-pin DDR4 SODIMM; no heat spreader, cables, adapters or tools are supplied or required for a compatible Supermicro system.

Which capacity or rank option should I select for a Supermicro workstation upgrade?

This part number MS21300-828K1 provides a single 8 GB 2Rx8 module; choose it when your board has a free SODIMM slot and the manual lists 8 GB 2666 non-ECC unbuffered as a supported configuration.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.