Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black chips, 260-pin SODIMM form factor, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2666 CL19 2Rx8 SODIMM SuperMicro memory upgrade

SKU CH-BWMT-TC6S0

8GB DDR4 2666 CL19 2Rx8 SODIMM module compatible with SuperMicro systems

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands system memory for heavier workloads
  • DDR4 2666 speed delivers high bandwidth for responsive computing
  • CL19 latency supports quick data access in demanding tasks
  • 2 V operation reduces power draw and heat output
  • 260-pin SODIMM form factor fits compatible Supermicro workstations

8GB DDR4 2666 SODIMM for SuperMicro

This 8 GB DDR4 2666 module is built for SuperMicro workstations and servers that accept unbuffered non-ECC SODIMMs. It targets administrators and integrators who need a direct replacement for the MEM-DR480L-IL02-SO26 part without changing platform firmware.

Tool-free slot insertion with 260-pin keying

The stick drops into a standard 260-pin SODIMM slot and locks with the side clips; no screws or cables are required. Because it is unbuffered and non-ECC, it will not function in systems that demand registered or error-correcting modules, so verify the platform requirement before ordering.

Single-rank alternative would add headroom

The 2Rx8 organisation delivers 8 GB at CL19 1.20 V, suitable for typical multi-threaded workloads and virtualization hosts. Capacity tops out at one module per slot; configurations needing more than 8 GB per channel must populate additional sockets or select higher-density parts.

Přednosti

  • 8 GB capacity expands system memory for heavier workloads
  • DDR4 2666 speed delivers high bandwidth for responsive computing
  • CL19 latency supports quick data access in demanding tasks
  • 2 V operation reduces power draw and heat output
  • 260-pin SODIMM form factor fits compatible Supermicro workstations

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

How can I verify the module is running at DDR4 2666 CL19 after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should report 2666 MT/s speed, CL19 latency, 1.20 V voltage and 2Rx8 organisation for the installed SODIMM.

What is included in the package and do I need any extra parts?

The box contains one 8 GB 260-pin DDR4 SODIMM; no heat spreader, cables, adapters or tools are supplied or required for a compatible Supermicro system.

Which capacity or rank option should I select for a Supermicro workstation upgrade?

This part number MS21300-828K1 provides a single 8 GB 2Rx8 module; choose it when your board has a free SODIMM slot and the manual lists 8 GB 2666 non-ECC unbuffered as a supported configuration.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.